This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X200-75SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X200-75SB
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X200-75SB is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X200-75SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X200-75SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X200-75SB
This ACPJ16X200-75SB is a double acting compact cylinder with an adjustable extend stroke: a stop screw trims the 200 mm stroke by up to 75 mm, giving a usable range of 125-200 mm on site. The 16 mm bore delivers 100.5 N push and 75.4 N pull at 0.5 MPa, rising to 140.7 N push at 0.7 MPa, with a theoretical peak of 20.5 kgf at 1.0 MPa. The 200 mm stroke exceeds the 75 mm standard limit for this bore, so it is a made-to-order build.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits deep fixtures and slim gantries. As a buyer rule of thumb, plan on about 60 N (roughly 6 kg of push) of real work at 0.5 MPa, and expect it to lift about 5 kg vertically with a 2:1 margin. The -S code on this model means the magnet is fitted, so CMSE / DMSE switches can be added. Note: the ACPJ family is discontinued; the current-production drop-in is the ACEJ16X200 - confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X200-75SB Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X200-75SB |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X200-75SB |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X200-75SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X200-75SB
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X200-75SB Is Used
Compact ejection on assembly jigs
The 100.5 N push at 0.5 MPa is enough to seat small connectors or pins in electronics fixtures, and the 75 mm window lets technicians trim the extend stroke to 125-200 mm without changing the cylinder.
Position-verified slide in a test rig
Because the -S magnet is fitted, CMSE or DMSE switches clamp onto the body to confirm end positions on a 200 mm slide, running at 30-500 mm/s within the 0.15-1.0 MPa (22-145 psi) supply band.
Light vertical lift in a packaging head
With about 5 kg of vertical lift capacity at a 2:1 margin, the 8 mm hard-chrome rod handles small hold-down plates in food-packaging machinery where a full-length profile cylinder will not fit.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X200-75SB with the ACEJ16X200-75SB
Size both ways before committing: the 12 mm bore gives 56.5 N push at 0.5 MPa, while the 20 mm bore reaches 157.1 N - this 16 mm unit at 100.5 N sits between them. The adjuster is a mechanical end stop for the extend stroke, not a mid-stroke lock, so on air loss the piston still drifts; do not use it to hold a load. Mounting options include FA/FB flange and LB foot, and the male rod thread (B code) on this model takes I/Y knuckles directly. If you need position feedback, this unit already carries the optional -S magnet for CMSE / DMSE switches. For new projects, order the ACEJ16X200 instead - same bore, stroke and force class.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X200-75SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X200-75SB FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa it pushes 140.7 N and pulls 105.6 N; theoretical maximum is 20.5 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: the stop screw shortens the 200 mm extend stroke by up to 75 mm, so the working range is 125-200 mm. The 200 mm stroke is non-standard for a 16 mm bore (standard max is 75 mm), so it is made to order. The port is M5x0.8 and the rod end is a male thread.
It is a compact short-body cylinder with a hard-anodized aluminium body, S45C hard-chrome rod, fixed TPU bumpers at both ends and FA/FB flange or LB foot mounting; the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be mounted. The ACPJ family is discontinued - the current-production drop-in is the ACEJ16X200 (swap the P for an E), same bore, stroke and force class; confirm the ISO 21287 mounting dimensions before swapping.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X200-75SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X200-75SB replacement — usually within 7-8 hours.