This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X30-30, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X30-30
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X30-30 is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 30mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X30-30 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X30-30
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X30-30
This is a double acting compact cylinder with an adjustable stroke: air drives the rod out and pulls it back, and an external stop screw trims the extend stroke anywhere within the ordered 30 mm window, giving a usable range of 0-30 mm. Note that the stop screw sets the end of travel only - it is not a mid-stroke lock, so the rod still drifts if air is lost.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into cramped jigs and guarding where a full-length body cannot. A hard-anodized aluminium body carries an S45C hard-chrome rod, fixed TPU bumpers sit at both ends, and the rod end is female M4x0.7 with M5x0.8 ports. This model is discontinued; the current-production replacement is the ACEJ16X30, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X30-30 Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X30-30 |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X30-30 |
| Bore size | Ø16 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X30-30 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X30-30
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X30-30 Is Used
Bottle-capping press
A short 30 mm stroke with on-site adjustment suits light press-fit and capping heads on compact packaging benches, where the short body fits under a low frame.
Ejector on a test fixture
Pushes finished parts off a nest between cycles; order the -S version when CMSE or DMSE switches are needed to confirm the eject position.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X30-30 with the ACEJ16X30-30
Choose the -S code if you want the optional magnet for CMSE / DMSE switches - without it no sensor can be fitted. FA/FB flange and LB foot mounts bolt to the standard face. Because this ACPJ is discontinued, order the ACEJ16X30 as the direct successor and verify the ISO 21287 mounting dimensions first.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X30-30
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X30-30 FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa it pushes 140.7 N and pulls 105.6 N; theoretical maximum is 20.5 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: a stop screw shortens the 30 mm extend stroke on site, so usable travel is 0-30 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a fixed TPU bumper at each end.
No - the ACPJ family is discontinued. The current-production direct is the ACEJ16X30 (swap the P for an E), which matches the same 16 mm bore, 30 mm stroke and force class in the ISO 21287 compact format. Confirm the ISO 21287 mounting dimensions against your fixture before ordering, since the ACP was built to a DIN-standard footprint.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X30-30
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X30-30 replacement — usually within 7-8 hours.