This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X35-10B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X35-10B
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X35-10B is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 35mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X35-10B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke35 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X35-10B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X35-10B
The ACPJ16X35-10B is a double acting compact cylinder with an adjustable extend stroke: the -10 code gives a 10 mm window, so a stop screw trims the 35 mm stroke down to 25 mm on site. Air drives the rod in both directions, a fixed TPU bumper decelerates each end, and the male rod thread (B code) bolts straight to external tooling. At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa that rises to 140.7 N.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight jigs and guard-mounted fixtures. Plan on roughly 60 N (about 6 kgf) of real work at 0.5 MPa, and expect it to lift about 5 kg vertically once you keep a 2:1 margin. Note that this model is discontinued: the current-production replacement is ACEJ16X35, so confirm ISO 21287 mounting dimensions before swapping. The magnet is the optional -S code; without it no CMSE / DMSE switch can be fitted.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X35-10B Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X35-10B |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X35-10B |
| Bore size | Ø16 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X35-10B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X35-10B
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X35-10B Is Used
Small-part ejection from a mould tray
A 25-35 mm trimmed stroke with about 60 N of usable push at 0.5 MPa knocks plastic caps off a nest without bruising them, and the male rod thread takes a custom ejector pin.
Vision-check clamping on a camera station
Order the -S magnet version to add CMSE or DMSE switches so the PLC confirms the clamp is fully forward before the inspection cycle fires.
Label press on a packaging line
The short body fits inside the guard where a full-length ISO 15552 profile cylinder will not, pressing labels onto cartons at 30-500 mm/s.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X35-10B with the ACEJ16X35-10B
Size it against neighbours: the 12 mm bore gives 56.5 N push at 0.5 MPa, while the 20 mm bore reaches 157.1 N, so pick the 16 mm when 100.5 N at 0.5 MPa covers the job. Remember the adjuster is a mechanical end stop for the extend stroke only - on air loss the piston still drifts, so do not treat it as a load-holding brake. FA/FB flange and LB foot mountings bolt to the standard face, and the optional -S magnet enables CMSE / DMSE switches. Order ACEJ16X35 for new builds since this ACPJ is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X35-10B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X35-10B FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa push is 140.7 N and pull 105.6 N; theoretical maximum is 20.5 kgf at 1.0 MPa. The -10 code gives a 10 mm adjustment window, so the extend stroke is trimmed anywhere between 25 and 35 mm with the stop screw. Operating range is 0.15-1.0 MPa (22-145 psi) and speed 30-500 mm/s.
It is a short-body compact cylinder with a hard-anodized aluminium body and S45C hard-chrome rod, saving about 50% of the mounting length of an ISO 15552 profile cylinder, with an M5x0.8 port and fixed TPU bumpers at both ends. The ACPJ family is discontinued; the current drop-in is ACEJ16X35 in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X35-10B
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X35-10B replacement — usually within 7-8 hours.