This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X60-30, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X60-30
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X60-30 is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X60-30 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X60-30
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X60-30
This discontinued ACPJ16X60-30 is a double acting compact cylinder with an adjustable extend stroke: a stop screw trims the 60 mm stroke by up to 30 mm, giving a usable range of 30-60 mm on site. Its hard-anodized aluminium body is an ISO 21287 short build that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures a full-length body cannot reach.
The rod is 8 mm with a female M4x0.5 thread, the port is M5x0.8, and fixed TPU bumpers sit at both ends. This model is no longer in production: the current direct is the ACEJ16X60, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X60-30 Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X60-30 |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X60-30 |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X60-30 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X60-30
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X60-30 Is Used
Sample press in a lab tester
About 6 kg of vertical lift capacity with margin suits pressing test coupons or capping sample vials, while the 30-60 mm adjustable range matches variable specimen heights.
Carton flap tuck on a packing line
The short ISO 21287 body fits under low guarding beside a conveyor, and 75.4 N pull at 0.5 MPa retracts the tuck blade cleanly at 30-500 mm/s.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X60-30 with the ACEJ16X60-30
The 30 mm window suits jigs where the final position is tuned after install. Note the stop screw only shortens the extend stroke and is not a load-holding device: on air loss the piston still drifts. FA/FB flange or LB foot mounts bolt to the ISO 21287 face, and add the -S code if you later need CMSE / DMSE switches - without it there is no magnet. Order the ACEJ16X60 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X60-30
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X60-30 FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa it pushes 140.7 N and pulls 105.6 N; theoretical maximum is 20.5 kgf at 1.0 MPa. The -30 code gives a 30 mm adjustment window, so the extend stroke is trimmed anywhere from 30 mm to the full 60 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with fixed TPU bumpers at both ends.
Order the ACEJ16X60, the current-production ISO 21287 successor: swap the P for an E and you get the same 16 mm bore, 60 mm stroke and force class in a matching short body. Because the ACP is DIN-standard, confirm the ISO 21287 mounting dimensions against your fixture before swapping. If you need position sensing, the replacement also takes the optional magnet code for CMSE / DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X60-30
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X60-30 replacement — usually within 7-8 hours.