This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X75-10, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X75-10
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X75-10 is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X75-10 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X75-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X75-10
Its stop screw trims the 75 mm stroke by up to 10 mm, giving a usable extend range of 65-75 mm on site. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body will not fit.
This model is discontinued; the current-production replacement is the ACEJ16X75, which matches the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping, since the ACP is DIN-standard. The body is hard-anodized aluminium with an S45C hard-chrome rod, a fixed TPU bumper at both ends, and a female M4x0.7 rod thread. Note that no magnet is fitted on this code; the optional -S magnet is what enables CMSE / DMSE switch mounting.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X75-10 Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X75-10 |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X75-10 |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X75-10 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X75-10
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X75-10 Is Used
Compact gating on a small CNC
With about 50% of the mounting length of an ISO 15552 profile cylinder saved, this 16 mm bore slides chip guards or gates closed inside tight machine envelopes at 30-500 mm/s.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X75-10 with the ACEJ16X75-10
The 75 mm stroke is the maximum standard stroke for bore 16, so no made-to-order length is involved. Match FA/FB flange or LB foot mounts to the ISO 21287 face, and if you need position sensing order the -S code, because without it no magnet is fitted and no CMSE / DMSE switch can be read. Remember the stop screw only shortens the extend stroke - it is not a mid-stroke lock, and on air loss the piston still drifts. Order the ACEJ16X75 as the current direct.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X75-10
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X75-10 FAQ
The -10 code gives a 10 mm adjustment window, so the stop screw trims the 75 mm extend stroke anywhere down to 65 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the port is M5x0.8.
Yes, this model is no longer in production. The current direct is the ACEJ16X75, which matches the same bore, stroke and force class; confirm the ISO 21287 mounting dimensions before swapping because the ACP is DIN-standard. On sensors: this code has no magnet fitted, so no switch can be mounted. If sensing is needed, order the -S version with the optional magnet, which accepts CMSE and DMSE reed or solid-state switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X75-10
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X75-10 replacement — usually within 7-8 hours.