This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ20X60-10B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ20X60-10B
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ20X60-10B is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø20mm bore and 60mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ20X60-10B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ20 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- StatusDiscontinued → ACEJ20X60-10B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ20X60-10B
Double acting and adjustable, the ACPJ20X60-10B is a discontinued DIN-standard compact cylinder: 20 mm bore, 60 mm stroke and a 10 mm male rod thread (the B code). At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa those figures rise to 219.9 N and 164.9 N, with a theoretical peak of 32 kgf at 1.0 MPa.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding. A stop screw trims the extend stroke anywhere in the ordered 10 mm window, giving a usable 50-60 mm range; it is a mechanical end stop only, so the piston still drifts if air is lost. Fixed TPU bumpers sit at both ends, speed runs 30-500 mm/s, and the port is M5x0.8. This model is discontinued - the current direct is the ACEJ20X60; confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPJ Adjustable Compact Cylinder ACPJ20X60-10B Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ20X60-10B |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ20X60-10B |
| Bore size | Ø20 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ20X60-10B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ20X60-10B
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ20X60-10B Is Used
Electronics assembly jig
Short-body mounting fits crowded PCB test fixtures where a full-length profile cylinder will not, and the male rod thread takes a standard knuckle.
Small carton kick-off
Uses the 50-60 mm adjustable range to nudge cartons onto a conveyor lane, with the fixed TPU bumper softening each extend at up to 500 mm/s.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ20X60-10B with the ACEJ20X60-10B
The 60 mm stroke is within the 100 mm max standard stroke for bore 20, so no made-to-order length is involved. Mount with FA/FB flange or LB foot hardware on the ISO 21287 face. This unit has no magnet fitted - order the -S code if you want CMSE / DMSE switch position sensing. Since ACPJ is discontinued, spec the ACEJ20X60 as the current-production equivalent.
Replacement checklist
- ✓ Current-production ACE → ACEJ20X60-10B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ20X60-10B FAQ
Push is 157.1 N and pull 117.8 N at 0.5 MPa; at 0.7 MPa push is 219.9 N and pull 164.9 N, with a theoretical max of 32 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, port M5x0.8, rod 10 mm male thread, and the extend stroke trims within the 10 mm window (50-60 mm usable).
No - the ACPJ family is discontinued. The current-production direct is the ACEJ20X60, which matches the same bore, stroke and force class. Because the ACP is DIN-standard rather than ISO 21287, confirm the mounting dimensions against the ACEJ datasheet before swapping, and add the -S code on the replacement if you need the optional magnet for CMSE / DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ20X60-10B
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ20X60-10B replacement — usually within 7-8 hours.