The AirTAC AFC F.R.L Pneumatic Air Filter AFC20002T is a genuine A/B-line two-unit F.R.L. set with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob and oil-mist lubrication with a transparent sight dome. Flow is confirmed from the datasheet on request.
The AFC20002T pairs a filter-regulator with a lubricator in AirTAC's compact A-line two-unit set, sized for 1/4 in NPT piping. The filter stage removes water and 40 um particulate, the regulator holds set pressure through a push-to-lock self-locking knob with a 0.15-0.9 MPa (20-130 psi) range, and the lubricator meters oil mist you can watch through the transparent sight dome. The drain is the default differential-pressure type with manual operation, and the supplied gauge reads in psi.
This is a genuine AirTAC part from the compact A/B line - the A-line is the smaller body - and the trailing T orders NPT thread; PT is the standard thread and G (BSPP) is available to order. The family spans 1/8 to 1/2 in ports (1500 to 4000). It runs on compressed air at up to 1.0 MPa (145 psi) inlet and -5 to 70 C (non-freezing), with PC bowls on both stages. Rated flow is not published as a single figure, so we will confirm flow and datasheet details on request.
| Model | Airtac AFC F.R.L Pneumatic Air Filter AFC20002T |
|---|---|
| Type | Two-Unit (Filter-Regulator + Lubricator) |
| Line | A-line (compact A/B air preparation) |
| Port size | PT1/4" (NPT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Lubrication | Oil-mist, transparent sight dome |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Stay with the compact A-line 2000 (1/4 in, smaller body) when panel space and moderate demand drive the choice; the B-line 2000 gives the same port in a larger body, and 3000/4000 step up to 3/8 and 1/2 in. This code keeps the default differential-pressure drain with manual operation; choose an A suffix for automatic draining. The filter element is the standard 40 um grade (W = 5 um). The trailing 2 selects a psi gauge (1 = MPa, 3 = bar, 4 = kgf/cm2 & psi; N deletes it), and the T suffix gives NPT thread while PT is standard and G is orderable. Flow is not a single published rating, so ask us to confirm sizing before ordering.
Set up a point-of-use drop for nail guns and staplers in a furniture or cabinetry shop: the 1/4 in NPT body ties straight into North American piping, the psi gauge matches local tool ratings, and the lubricator keeps tool O-rings supple.
Condition air at the wall drop feeding air vices, clamps and blow-off nozzles on a manual lathe or mill bench: water and dirt are filtered out, working pressure is locked in with the self-locking knob, and oil mist protects downstream cylinders.
Run the pushers and stops on a light parts-conveyor line from a 1/4 in NPT drop, where the compact A-line body fits tight panels, the psi gauge lets operators set line pressure in familiar units, and the drain is serviced during scheduled checks.
Flow is not published as a single rated number for this set; AirTAC's datasheet presents flow characteristics instead. Tell us your line pressure and air consumption and we will confirm the sizing figures from the datasheet on request.
The T orders NPT thread, common in US piping. The standard thread for the compact A/B family is PT; if you need British standard pipe, order the G (BSPP) variant instead. Pick the suffix that matches the piping you are tying into.