The AirTAC AFR Air Filter Regulator AFR15001 is a genuine A/B-line filter regulator with PT1/8" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The AirTAC AFR15001 is a compact A-line filter regulator that combines water and particulate removal with downstream pressure regulation in a single 1/8 in (PT) body. This configuration ships with the standard 40 um filter element, the default differential-pressure drain with manual override, a standard-type regulator with a 0.15-0.9 MPa (20-130 psi) regulation range, and a pressure gauge with an MPa scale. The push-to-lock self-locking adjustment knob holds your set pressure against vibration, and the PC bowl gives a clear view of condensate.
This is a genuine AirTAC part from the compact A/B line, offered here in the smallest 1500C size; 2000C, 3000C and 4000C sizes with 1/4, 3/8 and 1/2 in ports are available in the same family. Because flow is not published as a single rated figure, we confirm flow and datasheet figures for your application on request.
| Model | Airtac AFR Air Filter Regulator AFR15001 |
|---|---|
| Type | Filter Regulator |
| Line | A-line (compact A/B air preparation) |
| Port size | PT1/8" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose the A-line 1500C size with its 1/8 in PT port when your circuit needs compact air prep at low consumption; step up to 2000C, 3000C or 4000C if the line demands more flow. Keep the default 40 um element for general shop-air protection, or order the W variant for 5 um filtration. The default drain is differential-pressure with manual override; an A-suffix version gives fully automatic drainage. The trailing 1 here specifies the MPa gauge scale, and G or NPT thread variants can be ordered instead of the PT standard. Flow is not a single rating, so ask us to confirm sizing against the datasheet before you order.
Feeds clean, regulated air to a compact clamping cylinder on a milling or drilling fixture, where the MPa gauge lets the operator set and verify clamp pressure at the machine.
Conditions the air feeding a small vacuum or gripper module on an automation cell, protecting the miniature valves downstream from water and pipe-scale debris.
Provides filtered, manually settable air to a laboratory or QC test station, with the MPa-scale gauge reading the test pressure directly in the unit used on the rig.
AirTAC does not publish flow as a single rated figure for this compact series. We will confirm the flow and other datasheet figures for the AFR15001 on request so you can size it against your actual air consumption.
It specifies the pressure gauge scale supplied with the unit: 1 = MPa. Scales 2 = psi, 3 = bar and 4 = kgf/cm2 & psi are available as variants, and the gauge is included unless the code carries an N.