The AirTAC AFR Air Filter Regulator AFR1500L1 is a genuine A/B-line filter regulator with PT1/8" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The AFR1500L1 is a compact AirTAC filter-regulator in the small 1/8 in PT-port size, with a 40 um element, a differential-pressure plus manual drain, a PC bowl and a low-pressure (L) regulator type whose set pressure tops out at 0.4 MPa. The trailing 1 specifies a gauge with an MPa scale, so the set point is visible at the unit. Maximum inlet pressure is 1.0 MPa (145 psi) and the unit is rated -5 to 70 C (non-freezing).
This is a genuine AirTAC compact A/B-line part with a push-to-lock self-locking knob that holds the setting. The family runs from 1/8 to 1/2 in ports across the A and B bodies. Flow is not published as a single rating, so we confirm the datasheet flow and other figures for your line on request.
| Model | Airtac AFR Air Filter Regulator AFR1500L1 |
|---|---|
| Type | Filter Regulator |
| Line | A-line (compact A/B air preparation) |
| Port size | PT1/8" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Pick the A (AFR) or B (BFR) body by port and flow: 1500 is 1/8 in, 2000 is 1/4 in, 3000 is 3/8 in and 4000 is 1/2 in. This code pairs the 1/8 in size with the L low-pressure type (0.4 MPa maximum set point) and an MPa-scale gauge; standard types regulate 0.15-0.9 MPa. Drains come as differential-pressure plus manual by default or automatic with A, and W changes the element to 5 um. Thread is PT standard, with G and NPT available to order. Ask us to confirm flow sizing before ordering, since flow is not a single published rating.
Supplies filtered low-pressure air to the small cylinders and air jets inside a laboratory gas-analyzer cabinet, with the MPa gauge set well under the 0.4 MPa ceiling of this L type.
Feeds a short air-knife or nozzle row that clears dust from lenses or circuit boards before inspection, at the gentle regulated pressures this low-pressure type is built for.
Positions a small pneumatic actuator on a dosing needle valve in a bench filling rig where the process cannot tolerate full line pressure.
Yes. Flow is not published as a single rated figure, so tell us your inlet pressure, set pressure and air consumption and we will confirm the datasheet flow figures for this 1/8 in low-pressure filter-regulator on request.
It marks the low-pressure regulator type: the set pressure tops out at 0.4 MPa instead of the standard type's 0.9 MPa ceiling. Choose this type only where the actuator or process is rated below that; the inlet pressure limit stays 1.0 MPa (145 psi).