Airtac AL1500/2000 Lubricator AL1500
Genuine AirTAC lubricator, order code AL1500 from the AL-BL range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Model and portAL1500 · PT1/8
- Oil bowl25 cc oil bowl
- ThreadPT thread
- ModelsAL1500, AL2000, BL2000, BL3000, BL4000
- PortAL1500: PT1/8, AL2000: PT1/4, BL2000: PT1/4, BL3000: PT3/8, BL4000: PT1/2
- ThreadPT (standard), G, NPT (T)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac AL1500/2000 Lubricator AL1500
AirTAC's most compact A-line lubricator, the AL1500 fits PT1/8 ports and meters a fine oil mist into 1/8 branch lines from a 25 cc bowl. It runs on filtered air at 0.05-1.0 MPa (7-145 psi), tolerates 1.5 MPa (215 psi) proof pressure, and works from -5 to 70 C with no freezing. AirTAC recommends ISO VG32 turbine oil for refill.
The order code tells you exactly what you get: AL marks the smaller A-line body, 1500 fixes the PT1/8 port, and a blank thread position means standard PT thread. AirTAC's catalog also writes the size with a C (AL1500C); this code is the same lubricator written without it. If your hardware uses G or NPT threads, the series offers AL1500G and AL1500T variants instead.
Airtac AL1500/2000 Lubricator AL1500 Technical Specifications
| Order code | AL1500 |
|---|---|
| Product | Lubricator |
| Model and port | AL1500 · PT1/8 |
| Oil bowl | 25 cc oil bowl |
| Thread | PT thread |
| Models | AL1500, AL2000, BL2000, BL3000, BL4000 |
|---|---|
| Port | AL1500: PT1/8, AL2000: PT1/4, BL2000: PT1/4, BL3000: PT3/8, BL4000: PT1/2 |
| Thread | PT (standard), G, NPT (T) |
| Lubricator capacity | A1500/A2000: 25 cc · B2000/B3000: 60 cc · B4000: 90 cc |
| Fluid | Air |
| Operating pressure | 0.05 – 1.0 MPa (7 – 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -5 to +70 °C (no freezing) |
| Recommended oil | ISO VG32 turbine oil |
Source: AirTAC AL/BL series datasheet (p.287, 2025-11 edition, airtac.com), ordering code and specifications.
How to choose
Pick AL1500 when your drop is PT1/8 and the 25 cc bowl covers your oil budget. If the line is PT1/4, move up to AL2000, which keeps the same compact A-line body and bowl but doubles the port. Where the same 1/4 port must feed heavier flow, the B-line BL2000 is the larger-body alternative. For G or NPT threads on a 1/8 line, order AL1500G or AL1500T rather than adapting fittings to PT.
Applications
Point-of-use tool oiling
Mounted on a small PT1/8 drop ahead of air tools, the AL1500 mists ISO VG32 oil so internal seals and vanes stay film-lubricated without a central oiler.
Compact FRL panels
Its small A-line footprint suits tight filter-regulator-lubricator stacks on machine sub-panels where a B-line body would not fit beside the 1/8 porting.
Light-duty fixture circuits
On fixture and clamp circuits running low flow at 0.05-1.0 MPa, the 25 cc bowl supplies lubricant for long stretches between refills on short runs.
FAQ
What are the key figures of the AirTAC AL1500?
Port PT1/8, oil bowl capacity 25 cc, thread PT (standard), fluid air, operating pressure 0.05-1.0 MPa (7-145 psi), proof pressure 1.5 MPa (215 psi), temperature -5 to 70 C (no freezing), recommended oil ISO VG32 turbine oil.
How do I order the AL1500 with a thread other than PT?
A blank thread position in the order code means PT. Add G for G thread or T for NPT, giving AL1500G or AL1500T; the port and 25 cc bowl stay the same.