The AirTAC BFC F.R.L Pneumatic Air Filter BFC20001 is a genuine A/B-line two-unit F.R.L. set with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob and oil-mist lubrication with a transparent sight dome. Flow is confirmed from the datasheet on request.
The BFC sub-family pairs a B-line filter regulator with a lubricator as one two-unit set, so a single purchase covers filtering, pressure regulation and oil-mist lubrication of compressed air. This 2000-size set is threaded PT1/4. The filter stage keeps the standard 40 um element and the default differential-pressure and manual drain arrangement, while the regulator stage carries an MPa-scale gauge and a push-to-lock self-locking knob that holds settings between 0.15 and 0.9 MPa (20-130 psi). The lubricator's transparent sight dome lets you watch and set the oil drip rate. Both bowls are PC, the B-line carries a high-strength plastic protective cover over the bowl, maximum inlet pressure is 1.0 MPa (145 psi), and the temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC compact A/B-line part, offered in 1500 (1/8 in), 2000 (1/4 in), 3000 (3/8 in) and 4000 (1/2 in) port sizes. Flow is not published as a single rated figure for this family, so ask us to confirm sizing and datasheet figures on request.
| Model | Airtac BFC F.R.L Pneumatic Air Filter BFC20001 |
|---|---|
| Type | Two-Unit (Filter-Regulator + Lubricator) |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Lubrication | Oil-mist, transparent sight dome |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Pick the B-line 2000 frame for 1/4 in PT circuits where the larger body and its bowl protective cover suit the environment; the A-line set covers smaller 1/8 in and 1/4 in builds, and the 3000 or 4000 sizes step up to 3/8 in and 1/2 in. Drains are differential-pressure plus manual by default, with M for manual-only and A for automatic where nobody visits the unit daily. Filtration is 40 um standard or 5 um with the W option, and the regulator is the standard type or the L low-pressure type limited to 0.4 MPa. Gauges can be specified in MPa, psi, bar or kgf/cm2 & psi scales, or deleted with N. PT is the standard thread; G (BSPP) and NPT are order options. Since flow is not a single rating, ask us to confirm the set against your demand before ordering.
Feeds filtered, regulated and oil-misted air to impact wrenches and ratchets at machine assembly benches, keeping the vane motors lubricated shift after shift.
Conditions the supply air for the extension and clamp cylinders in a palletizing cell; the lubricator maintains an oil mist so seals and sliding surfaces run smoothly.
Prepares air for the fill-head and capper actuators on a bottling line, with the MPa gauge setting actuator pressure and the sight dome letting operators check the oil drip rate.
AirTAC does not state rated flow for the compact BFC two-unit set as a single figure, so we do not quote one. Share your working pressure and air demand and we will confirm the correct size and the datasheet flow figures on request.
The BFC adds a lubricator behind the filter regulator, so downstream cylinders and air tools also receive an oil mist; choose a BFR when the equipment must stay oil-free. Both keep the 40 um standard element with a 5 um W option, and the MPa gauge shown here can be ordered in other scales.