The AirTAC BFC F.R.L Pneumatic Air Filter BFC2000A1 is a genuine A/B-line two-unit F.R.L. set with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob and oil-mist lubrication with a transparent sight dome. Flow is confirmed from the datasheet on request.
The BFC2000A1 pairs a filter-regulator with a lubricator in AirTAC's compact B-line two-unit set for 1/4 in PT piping. The filter stage strips water and 40 um particulate, the regulator locks in your set pressure with a push-to-lock self-locking knob, and the lubricator feeds a visible oil mist through a transparent sight dome. The A suffix is the automatic drain, so condensate is discharged without manual draining, and the supplied gauge reads in MPa.
This is a genuine AirTAC part from the compact A/B line, in the larger B-line body whose PC bowls are shielded by high-strength plastic protective covers. Siblings cover 1/8 to 1/2 in ports (1500 to 4000) in PT, G or NPT thread. It works on compressed air at up to 1.0 MPa (145 psi) inlet, with a regulation range of 0.15-0.9 MPa (20-130 psi) and a temperature range of -5 to 70 C (non-freezing). Rated flow is not published as a single number; ask us and we will confirm flow and datasheet details on request.
| Model | Airtac BFC F.R.L Pneumatic Air Filter BFC2000A1 |
|---|---|
| Type | Two-Unit (Filter-Regulator + Lubricator) |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Lubrication | Oil-mist, transparent sight dome |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
The B-line 2000 body suits a 1/4 in port where the larger compact body's flow capacity is wanted; the A-line 2000 offers the same port in a smaller body. Here the A suffix gives the automatic drain - useful where nobody drains bowls daily - while the default is differential-pressure with manual drain. Filter grade is the standard 40 um element; specify the W suffix for 5 um air. The trailing 1 selects an MPa gauge (2 = psi, 3 = bar, 4 = kgf/cm2 & psi; N deletes it). Thread is PT as standard, with G (BSPP) or T (NPT) available to order. Flow is not a single rated figure, so ask us to confirm sizing before you order.
Condition the air feeding a cartoner's flap-tuck and sealing cylinders: filtered, regulated and lubricated air keeps case setup consistent, the self-locking knob holds machine pressure between shifts, and the auto drain clears condensate unattended.
Prepare air for spray guns in a finishing booth: water and 40 um dirt are removed before the regulator, the lubricator keeps gun air-motor parts oiled where fitted, and the MPa gauge reads in the units many Asian machine plates specify.
Feed bench pneumatic presses and workholding fixtures where a stable set pressure matters: the push-to-lock knob prevents drift, the sight dome shows oil feed to the cylinders, and the automatic drain keeps moisture out of the valve stack.
There is no single published rated-flow number for this set. AirTAC documents flow as characteristics on the datasheet, so share your operating pressure and consumption and we will confirm the figures from the datasheet on request.
The trailing 1 in the code selects a gauge reading in MPa, included by default. If your plant reads psi, bar or kgf/cm2 & psi, choose the 2, 3 or 4 suffix instead; the N suffix deletes the gauge entirely.