The AirTAC BFR Air Filter Regulator BFR20002T is a genuine A/B-line filter regulator with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The BFR20002T combines a 40 um filter and a pressure regulator in one compact B-line body for 1/4 in NPT ports. It separates water and particulate from the compressed air, drains the polycarbonate bowl (differential-pressure drain with manual override as standard), and holds your set downstream pressure steady. The push-to-lock self-locking adjustment knob prevents set-pressure drift, and the included gauge reads in psi. The standard-type regulation range is 0.15-0.9 MPa (20-130 psi), maximum working pressure is 1.0 MPa (145 psi), and the temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the compact A/B series, not the larger G/GA line, and the standard 40 um element can be swapped for the 5 um (W) grade where finer filtration is needed. Filter regulators in the family come in 1/8, 1/4, 3/8 and 1/2 in sizes, with automatic (A) drain as a decode option. Rated flow is not published as a single figure, so we confirm the datasheet values for you on request.
| Model | Airtac BFR Air Filter Regulator BFR20002T |
|---|---|
| Type | Filter Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (NPT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Pick the B-line BFR when you want the larger body; the A-line AFR is the smaller-body alternative. Your decode choices here: differential-pressure plus manual drain (standard, this code) versus automatic drain with the A suffix; 40 um standard element versus 5 um with W; standard type versus the L low-pressure type limited to 0.4 MPa; and the gauge scale digit, where 2 gives the psi gauge fitted on this model (N would omit the gauge). NPT is ordered with the T suffix; PT is the family standard and G (BSPP) is also available. Flow is not a single rated figure, so send us your line pressure and consumption and we will confirm sizing from the datasheet before you order.
Feeds clean, regulated air to the clamping cylinders on a CNC machining fixture so hold-down pressure stays consistent part after part.
Supplies filtered, regulated air to spray guns in a paint booth, keeping water and coarse particles out of the finish while holding gun pressure.
Regulates pressure to pick-and-place cylinders on a packaging line, protecting actuators and valves from overpressure and contamination.
AirTAC does not publish flow as a single rated figure for this compact family, so we cannot quote a number here. Tell us your line pressure and air consumption and we will confirm the correct size and the datasheet flow figures on request.
It sets the gauge scale: 2 means the included pressure gauge reads in psi. Other scale digits are available in the family (MPa, bar, or kgf/cm2 and psi), and the suffix N orders the unit without a gauge at all.