The AirTAC BFR Air Filter Regulator BFR2000AL1 is a genuine A/B-line filter regulator with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The BFR2000AL1 is an AirTAC compact B-line filter-regulator: it separates water and particulate from compressed air and then regulates downstream pressure in one body. This configuration is the 1/4 in PT size, comes with the standard 40 um filter element and an automatic drain that expels collected condensate from the PC bowl without manual attention. It is the low-pressure type, so regulated output is limited to a maximum of 0.4 MPa, and an MPa-scale pressure gauge is included for setting and monitoring.
This is a genuine AirTAC part from the compact A/B line, which spans 1/8 in (1500C), 1/4 in (2000C), 3/8 in (3000C) and 1/2 in (4000C) ports. Flow is not published as a single rated figure, so we confirm flow and datasheet figures on request before you order.
| Model | Airtac BFR Air Filter Regulator BFR2000AL1 |
|---|---|
| Type | Filter Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Within the compact B-line, the 2000C body covers 1/4 in ports; step up to the 3000C or 4000C when your line needs the larger B-series bodies, or down to the A-line 1500C for small stands. Choose the automatic drain (this A version) where the unit sits in an awkward spot or runs unattended; the default differential-pressure plus manual drain suits supervised installations. The 40 um element is standard; pick the W option for 5 um filtration. If your process only needs low regulated pressure, this L-type variant caps output at 0.4 MPa; otherwise choose the standard type. Thread is PT as standard, with G and NPT available to order.
Flow is not a single rating, so ask us to confirm sizing from the datasheet before ordering.
Feeds filtered, gently regulated air to vacuum and gripper circuits on robotic pick-and-place cells, where the low-pressure type keeps delicate handling forces in check and the MPa gauge makes set-point checks easy.
Conditions the air feeding heat-seal and forming stations on packaging lines: water and 40 um particulate are removed upstream of the seals, and pressure is held low and steady for consistent sealing.
Supplies regulated air to blow-off nozzles that clear dust and chips from parts on conveyor lines, with the automatic drain keeping condensate out of the jets and out of the finished product.
Flow is not published as a single rated figure for compact A/B-line units, because it depends on the operating condition. We confirm the flow figures and full datasheet for this model on request, so contact us with your line requirements before ordering.
The trailing A in BFR2000AL1 selects the automatic drain, which discharges condensate from the bowl on its own. It is the right choice where the unit is mounted in a hard-to-reach position or runs unattended; the standard version uses a differential-pressure drain with manual operation instead.