The AirTAC BFR Air Filter Regulator BFR3000A1 is a genuine A/B-line filter regulator with PT3/8" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The BFR3000A1 is an AirTAC compact B-line filter-regulator: one body that removes water and particulate from compressed air and then regulates downstream pressure. Filtration is the standard 40 um element, the bowl drains automatically thanks to the A suffix, and the pressure output is adjustable across the 0.15-0.9 MPa (20-130 psi) regulation range with a maximum inlet/working pressure of 1.0 MPa (145 psi). The trailing digit 1 means the included gauge is scaled in MPa, the port size is 3/8 in (3000C) with PT thread, and the push-to-lock self-locking knob holds the set pressure against vibration.
This is a genuine AirTAC part from the compact A/B line, the larger B body with a high-strength protective cover over the PC bowl. The BFR family spans 1/8 to 1/2 in sizes, with a 5 um element (W suffix) and G or NPT threads available to order. Rated flow is not published as a single figure, so ask us and we will confirm datasheet figures on request.
| Model | Airtac BFR Air Filter Regulator BFR3000A1 |
|---|---|
| Type | Filter Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT3/8" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
The B-line BFR suits 3/8 to 1/2 in circuits and higher air demand; the A-line AFR covers 1/8 to 1/4 in. The A suffix gives you an automatic drain, the right choice where the unit is mounted out of reach or the line runs unattended; leave it off for the default differential-pressure drain with manual override if an operator checks the bowl regularly. The standard element is 40 um; specify W for the 5 um grade if downstream equipment needs finer air. Gauges come in MPa, psi, bar or kgf/cm2 and psi scales, and PT is standard with G and NPT to order. Flow is not a single rating, so ask us to confirm sizing before ordering.
Conditions and regulates the air feeding a solenoid valve manifold on an automated machine, keeping contaminants and pressure swings away from the valves.
Feeds clean, regulated air to the stopper, gate and lift cylinders along a bottling or canning conveyor, with the auto drain coping with condensate on a wet line.
Installed at the drop leg of a factory air main serving an assembly cell, separating water and setting a stable working pressure for the tools and cylinders below.
Rated flow is not published as a single figure for the compact A/B line, so we do not quote a number. Tell us your port size and air demand and we will confirm the correct sizing and the relevant datasheet figures on request.
The A suffix means the PC bowl is fitted with an automatic drain, so collected condensate is discharged without an operator having to open the drain, which suits unattended or hard-to-reach mounting. The alternative on this family is the default differential-pressure drain with manual operation, available on other BFR codes.