The AirTAC BFR Pressure regulating filter BFR2000CL2WT is a genuine A/B-line filter regulator with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The BFR2000CL2WT is a compact B-line filter-regulator: one body that removes water and particulate from compressed air and regulates downstream pressure. This configuration is the 1/4 in NPT size with the 5 um element (W) in place of the standard 40 um, the low-pressure type (L) whose regulation tops out at 0.4 MPa, and a gauge with a psi scale (2). It carries a PC bowl with differential-pressure plus manual drain, works from -5 to 70 C (non-freezing) at up to 1.0 MPa inlet, and its push-to-lock self-locking knob holds the set pressure against vibration.
This is a genuine AirTAC part in the compact A/B line, available in 1/8, 1/4, 3/8 and 1/2 in sizes across the family. Flow is not published as a single rated figure, so ask us to confirm sizing and the current datasheet for your application before ordering.
| Model | Airtac BFR Pressure regulating filter BFR2000CL2WT |
|---|---|
| Type | Filter Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (NPT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose the B-line 2000 body (1/4 in NPT) when your piping and air demand suit the larger compact body; the A line covers the same sizes on the smaller body, and because flow is not a single published rating we confirm sizing on request. Filter grade: this model's W option gives 5 um filtration; the standard element is 40 um. Regulator type: the L suffix here is the low-pressure type limited to 0.4 MPa, while the standard type covers 0.15-0.9 MPa (20-130 psi). Drain: differential-pressure plus manual as decoded, or automatic with the A suffix. Gauge: included with a psi scale on this code; MPa, bar and kgf/cm2 scales are alternatives. Thread is NPT here; PT is the standard and G (BSPP) is available to order.
On a control panel that only needs a gentle, tightly held supply below 0.4 MPa, the low-pressure regulator set point and 5 um element protect positioner and transducer air while the psi gauge reads in familiar US units.
Feeding lab bench instruments that are sensitive to both particles and pressure spikes, the 5 um element polishes the compressed air and the low-pressure type caps delivery at 0.4 MPa for gentle, repeatable supply.
On a US-built process skid with NPT air piping, this unit filters and regulates the supply to a bank of low-pressure actuators, with the self-locking knob keeping the set point stable through shift-long cycling.
Flow for the compact B-line filter-regulator is not published as a single rated figure, so we do not quote one here. Share your line pressure and air consumption and we will confirm the sizing and flow data from the AirTAC datasheet on request.
L is the low-pressure type, limited to 0.4 MPa regulation; 2 means the included gauge reads in psi; W is the 5 um filter element instead of the standard 40 um; and T specifies NPT thread instead of the standard PT. Together they make this a 1/4 in NPT, low-pressure, psi-gauge, 5 um filter-regulator.