The AirTAC BL Air Lubricator BL2000 is a genuine A/B-line lubricator with PT1/4" ports. It is the compact air-preparation line and oil-mist lubrication with a transparent sight dome. Flow is confirmed from the datasheet on request.
The BL2000 is an AirTAC compact B-line air lubricator for 1/4 in (PT) ports. It adds a fine oil mist to the compressed air line so downstream cylinders, valves and air tools stay lubricated in service. The polycarbonate bowl carries a high-strength plastic protective cover, a B-line safety trait, and the transparent sight dome lets you watch and set the oil drip rate. Working pressure runs from 0.05 MPa up to 1.0 MPa (145 psi) at -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the compact A/B series, not the larger G/GA line. The same lubricator function is available in 1/8 in (1500), 1/4 in (2000), 3/8 in (3000) and 1/2 in (4000) sizes. Note that the BL2000 only lubricates: it does not filter water or particulate and does not regulate pressure. Rated flow is not published as a single figure, so we confirm the datasheet values for you on request.
| Model | Airtac BL Air Lubricator BL2000 |
|---|---|
| Type | Air Lubricator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (PT thread) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Lubrication | Oil-mist, transparent sight dome |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose the B-line BL when you want the larger body with its high-strength bowl cover; the A-line AL is the smaller-body alternative where panel space is tight. PT is the standard port thread for the BL2000, and G (BSPP) or NPT versions can be ordered by adding the corresponding suffix to the code. Because this unit has no bowl drain, no filter element and no setting knob, pair it with an AF/BF filter and an AR/BR regulator if your line needs those jobs done, or step up to the AFC/BFC two-unit set. Flow is not a single rated figure, so send us your demand and we will confirm sizing from the datasheet before you order.
Feeds a measured oil mist to impact wrenches and ratchets on an automotive service bench, keeping tool motors lubricated through the working shift.
Supplies lubricated air to the cylinders that drive flap folding and taping heads on a carton sealing conveyor, reducing seal and piston wear.
Mists oil into the air feeding a small pneumatic press ram, protecting seals and moving parts in repetitive stamping and riveting work.
Flow for AirTAC compact lubricators is not published as a single rated figure, so we do not quote a number here. Send us your line pressure and air demand and we will confirm the correct size and the datasheet flow figures on request.
PT is the standard port thread for the BL2000. G (BSPP) and NPT versions are available to order by adding the corresponding suffix to the code - just tell us your piping standard when you order.