The AirTAC Airtac BL Air Lubricator BL2000T is a genuine A/B-line lubricator with PT1/4" ports. It is the compact air-preparation line and oil-mist lubrication with a transparent sight dome. Flow is confirmed from the datasheet on request.
The AirTAC BL2000T is a compact B-line air lubricator that adds a fine oil mist to compressed air so downstream cylinders, valves and air tools receive lubrication as they run. This 2000-size unit has a 1/4 inch NPT port, and the transparent sight dome lets an operator watch the drip rate and set it precisely for the equipment being served. The bowl is polycarbonate (PC), and as a B-line model the bowl carries a high-strength plastic protective cover. This is a genuine AirTAC part from the compact A/B line, sold by a US distributor. The compact line also comes in 1500 (1/8 inch), 3000 (3/8 inch) and 4000 (1/2 inch) sizes, so the same lubricator family can be matched to the rest of your air-preparation stack. Because rated flow is not published as a single figure, we confirm flow and datasheet figures on request.
| Model | Airtac BL Air Lubricator BL2000T |
|---|---|
| Type | Air Lubricator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (NPT thread) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Lubrication | Oil-mist, transparent sight dome |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose the B-line BL body when your port and flow requirement sit above the smaller A-line: 1500 is 1/8 inch, 2000 is 1/4 inch, 3000 is 3/8 inch and 4000 is 1/2 inch, all in the compact body. This code ends in T for NPT thread; PT is the standard option and G (BSPP) can be ordered, so pick the thread that matches your piping. Working pressure goes up to 1.0 MPa (145 psi) with inlet starting from 0.05 MPa, and temperature range is -5 to 70 C (non-freezing). Flow is not a single published rating for this family, so ask us to confirm sizing against your demand before ordering.
Installed ahead of impact wrenches, ratchets and air ratchets on a shop air drop, the BL2000T feeds a metered oil mist into the 1/4 inch tool line so vane motors stay lubricated through the shift. The sight dome lets technicians check the drip setting at a glance.
On carton-sealing and case-packing machinery, the lubricator sits in the supply line serving gripper and pusher cylinders, delivering continuous oil mist so seals and bores last longer during high-cycle production runs.
Mounted on the air-preparation panel of a CNC machining center, the BL2000T lubricates the air circuit serving tool-change and clamping actuators, with the protective bowl cover guarding the PC bowl in the shop environment.
Flow for this family is not published as a single rated number, so we do not quote one here. Send us your line size and air demand and we will confirm the correct sizing and flow figures from the AirTAC datasheet on request.
The trailing T means this BL2000 is supplied with NPT (1/4 inch) ports. PT is the standard thread for the series and G (BSPP) is available to order, so choose the suffix that matches your piping; the body size and function stay the same.