The AirTAC BL Air Lubricator BL3000 is a genuine A/B-line lubricator with PT3/8" ports. It is the compact air-preparation line and oil-mist lubrication with a transparent sight dome. Flow is confirmed from the datasheet on request.
The AirTAC BL3000 is a B-line compact air lubricator that meters oil mist into the compressed air stream to lubricate downstream pneumatic tools and cylinders. It does not filter and does not regulate pressure. This configuration is the 3/8 in size with PT ports, and the transparent sight dome lets you watch and set the oil drip rate directly. The bowl is polycarbonate (PC) and carries a high-strength plastic protective cover, a B-line safety trait. Max inlet pressure is 1.0 MPa (145 psi), inlet starts at 0.05 MPa, and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the compact A/B line, not the larger G/GA series. The B-line lubricator is also available in 1500 (1/8 in), 2000 (1/4 in) and 4000 (1/2 in) sizes, with G or NPT threads as order options. Flow and datasheet figures are confirmed on request, as they are not published as a single rating.
| Model | Airtac BL Air Lubricator BL3000 |
|---|---|
| Type | Air Lubricator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT3/8" (PT thread) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Lubrication | Oil-mist, transparent sight dome |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Pick B-line (BL3000 = 3/8 in PT) when the line port and duty sit at this size; A-line covers 1/8 in and 1/4 in points. Match the port to your existing pipework: PT is the standard thread, with G (BSPP) and NPT orderable to suit imports or in-house spool pieces. Remember a lubricator must sit downstream of any filter and after the regulator so mist reaches the tools instead of being stripped out. Oil capacity and consumption figures are datasheet items; ask us to confirm them on request before ordering.
Feeding impact wrenches and ratchets at an assembly or maintenance station, the mist carry-over keeps the tool's motor and vanes film-lubricated through a full shift of trigger cycles.
In a commercial-vehicle service bay, the 3/8 in lubricated drop serves shop impact guns and tire-chuck lines, so the tools that live on a reel all day keep running smooth instead of running dry.
Downstream on a bottling conveyor, cylinders that index and push bottles hundreds of times a minute get a steady oil mist, extending seal and bore life on high-cycle motion.
Flow and oil figures for this family are not published as a single rating, and oil consumption depends on how you set the drip. We confirm sizing, and the datasheet figures for flow and oil, on request before you order.
Always downstream of the filter and regulator, close to the equipment being lubricated. Placed before a filter or regulator, the oil mist it produces is simply stripped back out of the air before it reaches your tools.