The AirTAC BR Air Pressure Regulator BR30001 is a genuine A/B-line regulator with PT3/8" ports. It is the compact air-preparation line, regulating 0.05 - 0.9 MPa (7 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The BR30001 is a pressure regulator from AirTAC's compact B-line. It reduces and holds downstream air pressure in a settable range of 0.05 to 0.9 MPa (7 to 130 psi), with a maximum inlet/working pressure of 1.0 MPa (145 psi). The self-locking push-to-lock adjustment knob keeps your set pressure from drifting, and this configuration ships with a mounting bracket and a gauge graduated in MPa. It handles compressed air only, in the larger B-line body with a 3/8 in PT port, and works from -20 to 70 C.
This is a genuine AirTAC part in the compact A/B series, which spans four body sizes: 1500 (1/8 in), 2000 (1/4 in), 3000 (3/8 in) and 4000 (1/2 in). It is a regulator only - no filtration or lubrication. Flow figures are not published as a single rating, so contact us and we will confirm the datasheet numbers for your application on request.
| Model | Airtac BR Air Pressure Regulator BR30001 |
|---|---|
| Type | Air Pressure Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT3/8" (PT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 C |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose B-line (BR) when your line needs the larger body and port: this model is 3/8 in PT. The compact line also comes in 1/8, 1/4 and 1/2 in, so match the body to your required flow - ask us to confirm sizing, because flow is not stated as a single rated figure. The standard regulator range is 0.05 to 0.9 MPa; if you only need up to 0.4 MPa, ask about the low-pressure L type. The trailing 1 in the code sets the gauge to an MPa scale (2 is psi, 3 is bar, 4 is kgf/cm2 and psi), and a bracket is included by default. PT thread is the standard; G (BSPP) and NPT versions are available to order.
Set a steady, repeatable pressure to the pneumatic cylinders that drive carton closing and case-packing heads, so jaw force stays consistent through every shift.
Drop line pressure to the exact clamping force a machining fixture needs, protecting thin-walled workpieces while the self-locking knob holds the setting.
Feed stoppers, gates and diverters along a conveyor line at a fixed pressure so sequencing actions act predictably without hammering the mechanism.
Regulators in this family are not published with a single rated flow number, and we will not quote one that is not in the datasheet. Send us your line conditions and we will confirm the correct datasheet figures and sizing for the BR30001 on request.
A trailing digit after the size sets the gauge scale on regulators: 1 is MPa, 2 is psi, 3 is bar, and 4 is kgf/cm2 and psi. The BR30001 has an MPa-scale gauge. If you omit the digit or order the N version, the gauge selection changes - ask us and we will decode your exact configuration.