The AirTAC BR pressure regulating valve BR2000C2T is a genuine A/B-line regulator with PT1/4" ports. It is the compact air-preparation line, regulating 0.05 - 0.9 MPa (7 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The BR2000C2T is an AirTAC compact B-line air pressure regulator: it reduces and holds a steady downstream pressure from your compressed air supply. It does not filter and it does not lubricate the air. This configuration is the 1/4 in port size with NPT threads, the standard type with a 0.05-0.9 MPa (7-130 psi) regulation range, and a pressure gauge with a psi scale included so you can set and read the outlet pressure directly.
This is a genuine AirTAC part from the compact A/B line, the smaller-footprint range sized below the larger G/GA units. The 2000 size suits 1/4 in piping; other compact sizes cover 1/8, 3/8 and 1/2 in ports, with PT as the standard thread and G or NPT to order. AirTAC does not publish flow as a single rated figure, so we confirm the datasheet flow and sizing figures for you on request.
| Model | Airtac BR pressure regulating valve BR2000C2T |
|---|---|
| Type | Air Pressure Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (NPT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 C |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose the B-line 2000 body when your line runs 1/4 in piping and you want the larger compact body; the A-line 2000 equivalents cover the same port in a smaller body. The trailing 2 in the code means the included gauge reads in psi; other scale options exist to order. If you want to panel-mount without a bracket, ask for the J variant; the standard BR2000 includes the bracket. Thread: this code is NPT; PT is the AirTAC standard and G is also available.
Flow is not published as a single rated number for this family, so before ordering send us your line pressure, required downstream pressure and consumption, and we will confirm sizing against the datasheet.
Sets a stable operating pressure for the pneumatic cylinders that open, close and clamp cartons on a packaging line, so cycle behaviour stays repeatable through the shift.
Regulates the air feeding pneumatic clamps on a CNC workholding fixture, holding the clamp pressure the operator has set so parts stay secured during cutting.
Drops plant air to the working pressure needed by air screwdrivers and riveters at an assembly bench, with the psi gauge letting each station be set the same way.
AirTAC does not state flow for this family as a single rated figure, so we will not quote you a number we cannot back up. Send us your inlet pressure, set outlet pressure and air consumption, and we will confirm the sizing and flow figures from the datasheet on request.
The trailing 2 is the gauge scale: the pressure gauge supplied with this regulator reads in psi. The gauge is included by default on BR regulators; only the N variant of the code leaves it out. The bracket is also included; the J variant omits it.