This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X100-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10-S
The AirTAC MALJ32 Adjustable Mini Cylinder MALJ32X100-10-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 10 mm, giving a usable end-position window from 90 to 100 mm. This model is discontinued — the direct replacement is the MBLJ32X100-10-S.
- BoreØ32 mm
- Stroke100 mm
- Adjust window90–100 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X100-10-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10-S
The AirTAC MALJ32X100-10-S is a discontinued double-acting, double-rod mini cylinder with a 32 mm bore and a 100 mm stroke. It features a rear adjuster that allows you to trim up to 10 mm, providing a usable stroke window of 90-100 mm so you can fine-tune the end position without adding external stops. The direct replacement is the MBLJ32X100-10-S, which matches the bore, stroke, force, G1/8 port, and mounting footprint.
This -S model includes a magnet for position sensing. On the MALJ it uses older CS1-M or DS1-M switches, while the MBLJ replacement upgrades to CMSG, DMSG, or EMSG sensors. The MALJ body uses threaded covers and a fixed rubber bumper; it has no adjustable air cushion, so the adjuster strictly acts as a travel stop rather than a load-holding lock.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X100-10-S |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Adjustable window | 90 – 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X100-10-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X100-10-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Nominal stroke length in mm. |
| -10 | Adjustable amount: trim the end to a 90–100 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10-S Is Used
Bottle Capper Height Set
Fine-tune the capping head descent on a rotary beverage filler; the 10 mm rear trim lets operators adjust cap contact pressure without machining new hard stops for the 346 N pull return.
Wire Straightener Tension
Regulate the guide roller position on a wire drawing bench to control material tension, using the fixed rubber bumper to soften the 100 mm stroke end impact without needing an air cushion.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10-S with MBLJ32X100-10-S
To replace this MALJ32X100-10-S, order the direct replacement MBLJ32X100-10-S. Confirm the 32 mm bore, 100 mm stroke, 10 mm adjust code, PT/G1/8 port, and M10x1.25 rod-end thread. Mounting remains Basic, FA, or LB only, as neither series uses a back cover or SDB. The -S magnet means you must swap your CS1-M or DS1-M switches for CMSG, DMSG, or EMSG sensors. Remember the adjuster is a stop, not a lock, so add an external lock for held loads.
Upgrade checklist
- ✓ Order the MBLJ32X100-10-S (same bore/stroke/adjust)
- ✓ Same 90–100 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X100-10-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10-S FAQ
Yes, the MALJ32X100-10-S is discontinued. The direct replacement is the MBLJ32X100-10-S, which matches the 32 mm bore, 100 mm stroke, 10 mm adjust code, and G1/8 port. You must upgrade your position sensors from the old CS1-M or DS1-M switches to the CMSG, DMSG, or EMSG family, as the MBLJ uses a riveted rolling-packed body instead of threaded covers.
The 10 mm adjust code means the rear stopper lets you shorten the 100 mm stroke, creating a usable end-position window of 90 to 100 mm. The adjuster is a travel stop, not a lock, so it will not hold a load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X100-10-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10-S → MBLJ32X100-10-S)
Tell us the quantity and destination — we quote the direct MBLJ32X100-10-S replacement with price, stock and lead time, usually within 7-8 hours.