This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X80-100-S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-100-S
The AirTAC MALJ32 Adjustable Mini Cylinder MALJ32X80-100-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 100 mm, giving a usable end-position window from -20 to 80 mm. This model is discontinued — the direct replacement is the MBLJ32X80-100-S.
- BoreØ32 mm
- Stroke80 mm
- Adjust window-20–80 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X80-100-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-100-S
The AirTAC MALJ32X80-100-S is a discontinued double-acting, double-rod mini cylinder with a rear adjustable stroke stopper. It features a 32mm bore, an 80mm stroke, and a 100mm adjust code, giving a usable end-position window of 0-80mm. The direct replacement is the MBLJ32X80-100-S, matching the bore, stroke, port, and mounting.
This -S SKU includes a magnet for position sensing. The legacy MALJ uses CS1-M or DS1-M switches, while the MBLJ replacement upgrades to CMSG, DMSG, or EMSG sensors. The MALJ has threaded covers, whereas the MBLJ features a riveted rolling-packed body. Both use a fixed rubber bumper, so the adjustable stroke dial sets the travel end but does not lock the load without live air pressure.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-100-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-100-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X80-100-S |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Adjustable window | -20 – 80 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X80-100-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X80-100-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-100-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×80 | Nominal stroke length in mm. |
| -100 | Adjustable amount: trim the end to a -20–80 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-100-S Is Used
PCB Depaneling Router Stop
Dial the exact 0-80mm reach on a depaneling router to cut only the board v-grooves.
Carton Flap Folder Timing
Adjust the end position on a carton erector to fold varying flap depths. The G1/8 port cycles fast, and the fixed rubber bumper absorbs the 30-800 mm/s travel impact.
Pneumatic Press Depth Setter
Set precise travel on a small bearing press to avoid seating a 12mm shaft too deeply. The 100mm adjust window lets you trim reach without adding external physical stops.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-100-S with MBLJ32X80-100-S
To replace the MALJ32X80-100-S, order the exact direct replacement MBLJ32X80-100-S. Confirm the 32mm bore, 80mm stroke, 100mm adjust code, G1/8 port, PT thread, and FA or LB mounting. The -S magnet means a sensor family change from CS1-M/DS1-M to CMSG/DMSG/EMSG. There is no back cover or SDB option. Remember the rear adjuster is a travel stop, not a lock.
Upgrade checklist
- ✓ Order the MBLJ32X80-100-S (same bore/stroke/adjust)
- ✓ Same -20–80 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X80-100-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-100-S FAQ
Yes, the MALJ32X80-100-S is discontinued. The direct replacement is the MBLJ32X80-100-S, which matches the 32mm bore, 80mm stroke, 100mm adjust code, and G1/8 port. You will need to switch from the older CS1-M/DS1-M switches to CMSG/DMSG/EMSG sensors for the new riveted body.
The usable window is 0-80mm because the 100mm adjust code can trim the full 80mm stroke. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X80-100-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-100-S → MBLJ32X80-100-S)
Tell us the quantity and destination — we quote the direct MBLJ32X80-100-S replacement with price, stock and lead time, usually within 7-8 hours.