Airtac SAUD Double Rod Cylinder SAUD100X130S
The AirTAC SAUD Double Rod Cylinder SAUD100X130S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 130mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke130 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X130S
The AirTAC SAUD100X130S is a double-acting, double-rod profile cylinder. A 25mm rod exits both ends of the hard-anodized extruded aluminum barrel, meaning both faces use the rod-side piston area. This yields identical push and pull thrust of 3681N at 0.5MPa. The body is inherently shorter than an ISO 15552 unit of the same 100mm bore.
This -S variant includes a piston magnet for CMSG, DMSG or EMSG switches. The 1/2inch port drives a 30-800mm/s speed range.
Airtac SAUD Double Rod Cylinder SAUD100X130S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X130S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X130S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X130S Is Used
Twin-Tool Machining
Drives two opposing machining heads simultaneously with equal 3681N thrust in both directions.
Non-Rotating Lift
Lifts heavy 188kg vertical loads using the dual rods to prevent mechanical twist and binding.
Back-End Sensing
Uses the protruding rear rod to trip a CMSG sensor cam without cluttering the active tool end.
Is the Airtac SAUD Double Rod Cylinder SAUD100X130S the Right Cylinder?
Select this 100mm bore if you need substantial equal-both-ways thrust. Stepping down, the 80mm bore provides 2268N at 0.5MPa, while stepping up is unavailable as 100mm is the largest standard size. The twin-rod architecture is ideal for anti-rotation guidance, driving twin tooling, or mounting a switch cam on the back rod. Mounting is limited to Basic, FA flange, and LB foot styles matching the AirTAC SC series. At 130mm stroke side-load is minimal, but always guide the load externally on longer strokes.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X130S FAQ
Because the 25mm rod exits both ends, the thrust is equal in both directions: 3681N at 0.5MPa, 5153N at 0.7MPa, and 6626N at 0.9MPa. The 1/2inch port and 29mm cushions handle the resulting flow and deceleration.
No. The adjustable cushions only decelerate the piston near stroke end; they do not lock. For load holding on air loss, you must fit an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X130S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.