Airtac SAUD Double Rod Cylinder SAUD80X1000
The AirTAC SAUD Double Rod Cylinder SAUD80X1000 is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 1000mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke1000 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X1000
The AirTAC SAUD80X1000 is a double-acting, double-rod profile cylinder featuring an 80 mm bore and a 1000 mm stroke. Because a rod protrudes from both ends, the push and pull output is identical, providing 2268 N of force each way at 0.5 MPa. The extruded aluminum barrel keeps the overall length shorter than a standard ISO 15552 unit of the same bore. This model uses a 3/8 inch port and incorporates adjustable 28 mm air cushions at both ends.
The dual-rod geometry prevents torsional twist for non-rotating tasks and allows a sensor cam to be mounted on the back rod, though this specific SKU lacks a magnet and cannot support magnetic switches. For high-temperature environments up to 150 C, Viton H seals are available. Note that at 1000 mm, external guides are recommended to prevent rod bending under side loads.
Airtac SAUD Double Rod Cylinder SAUD80X1000 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X1000 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X1000
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X1000 Is Used
Synchronized Transfer
Drives dual pusher arms simultaneously from one piston, keeping product flow aligned on packaging lines without torsional deflection.
Twin-Tool Machining
Operates opposing fixtures or cutters where equal clamping and retraction force is mandatory for balanced part finishing.
Guided Vertical Press
Lowers heavy assemblies with stable anti-rotation control, relying on the dual shafts to prevent platform twisting during descent.
Is the Airtac SAUD Double Rod Cylinder SAUD80X1000 the Right Cylinder?
Select this 80 mm bore model when your application demands equal force in both directions, yielding 2268 N at 0.5 MPa. If you need less thrust, step down to the 63 mm bore which provides 1402 N both ways. If you require more power, the 100 mm bore offers 3681 N. A double-rod configuration is the right call for anti-rotation guidance, driving twin tooling, or carrying a switch cam on the rear shaft. Mounting hardware is compatible with the AirTAC SC series, limited to Basic, FA flange, and LB foot styles. Because the stroke is 1000 mm, always use external linear guides to support the load and prevent rod bending. This non-magnetized version cannot accept CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X1000 FAQ
The force is equal in both directions due to the double-rod design. It outputs 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. The operating pressure range is 0.15 to 1.0 MPa, and the 3/8 inch port feeds a 25 mm diameter rod.
No, a plain cylinder drifts without live air, as the 28 mm cushions only decelerate near stroke end. For load holding, install an external rod lock or pilot-operated check valve. Also, this SKU lacks a magnet, so it cannot accept magnetic position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.