Airtac SAUD Double Rod Cylinder SAUD80X1000S
The AirTAC SAUD Double Rod Cylinder SAUD80X1000S is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 1000mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke1000 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X1000S
The AirTAC SAUD80X1000S is a double-acting, double-rod profile cylinder. A rod exits both ends, meaning push and pull forces are identical at 2268 N each way at 0.5 MPa. The extruded aluminium barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore. This 80 mm bore version uses a 3/8 inch port and a 25 mm rod.
With a 1000 mm stroke, external guides are recommended to prevent rod bending under side loads. The built-in magnet (-S) supports CMSG, DMSG, or EMSG switches. For high heat, Viton H seals raise the limit to 150 C.
Airtac SAUD Double Rod Cylinder SAUD80X1000S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X1000S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X1000S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X1000S Is Used
Synchronized Transfer
Drives dual conveyor belts simultaneously from one piston, ensuring perfectly timed material transfer without torsional twist.
Twin-Tool Machining
Powers two opposing machining heads with identical 2268 N force, keeping cutting pressure balanced on both sides.
Cam-Triggered Cutting
Uses the protruding back rod as a switch cam to trip an EMSG sensor, confirming the 1000 mm stroke position for a shear.
Is the Airtac SAUD Double Rod Cylinder SAUD80X1000S the Right Cylinder?
Select this 80 mm bore when you need 2268 N of equal force in both directions. If you need less power, the 63 mm bore provides 1402 N both ways. If you need more, the 100 mm bore yields 3681 N. A double rod is the right call for anti-rotation guidance, driving twin tooling, or mounting a switch cam on the back end. Mounting is limited to Basic, FA, and LB types, matching the AirTAC SC series. Because the stroke is 1000 mm, always use external guides to manage side loads and prevent rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X1000S FAQ
Force is equal both ways because of the double rod. It delivers 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa.
No. The air cushions only decelerate the piston near the stroke ends. To hold a load securely, you must add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.