Airtac SAUD Double Rod Cylinder SAUD80X105
The AirTAC SAUD Double Rod Cylinder SAUD80X105 is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 105mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke105 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X105
The AirTAC SAUD80X105 is a double-acting, double-rod profile cylinder. A rod exits both ends on one piston, so both faces use the rod-side area. Push and pull force are equal at 2268 N each way at 0.5 MPa. The 3/8 inch port and M20x1.5 rod thread handle robust flow. This extruded aluminum profile barrel is shorter than an ISO 15552 cylinder of the same bore.
This plain SKU lacks a magnet, so it cannot take a magnetic switch. The adjustable 28 mm air cushions only decelerate near stroke end; use an external rod lock or pilot-operated check valve to hold loads on air loss.
Airtac SAUD Double Rod Cylinder SAUD80X105 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X105 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X105
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X105 Is Used
Twin-Tool Stamping
Drives two synchronized forming tools from one piston, ensuring parallel contact without rotational twist on the workpiece.
Dual-End Diverters
Powers a diverter arm where the back rod simultaneously trips a mechanical limit switch to confirm gate position.
Vertical Lift Stops
Raises and lowers heavy pallet stops with equal force both directions, safely decelerating 116 kg loads at stroke ends.
Is the Airtac SAUD Double Rod Cylinder SAUD80X105 the Right Cylinder?
Select this 80 mm bore if you need 2268 N of equal force both ways at 0.5 MPa. Step down to the 63 mm bore for 1402 N, or step up to the 100 mm bore for 3681 N. A double rod is the right call for anti-rotation guidance, driving twin tooling, or mounting a cam on the back rod. Mounting is limited to Basic, FA, and LB styles, sharing compatibility with the AirTAC SC series. At a 105 mm stroke, side-load is minimal, but always guide the load to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X105 FAQ
Force is equal both ways because a rod exits both ends. It generates 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. The 3/8 inch port supplies air to both chambers.
No. This plain SAUD80X105 SKU lacks a magnet and cannot take a magnetic switch. For position sensing, select the -S option to use CMSG, DMSG, or EMSG sensors, or mount an external switch on the back rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X105
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.