Airtac SAUD Double Rod Cylinder SAUD80X130
The AirTAC SAUD Double Rod Cylinder SAUD80X130 is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 130mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke130 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X130
The AirTAC SAUD80X130 is a double-acting, double-rod profile cylinder. A Ø25 mm rod protrudes from both ends of the hard-anodized extruded aluminum barrel, meaning both faces use the rod-side piston area. This yields identical push and pull thrust of 2268 N each way at 0.5 MPa. The 3/8 inch port feeds the chambers, and the unit runs at 30-800 mm/s.
Because both faces lose identical rod area, output force is perfectly balanced. The extruded profile body is notably shorter than a standard ISO 15552 cylinder of the same bore. It uses adjustable 28 mm air cushions at both ends to decelerate the stroke smoothly.
Airtac SAUD Double Rod Cylinder SAUD80X130 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X130 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X130
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X130 Is Used
Lift and Lower Station
Drives a vertical elevator platform where the balanced 2268 N thrust and twin rods prevent chassis twisting during heavy product transfer.
Dual-Head Machining
Carries opposing tooling on both rod ends to machine two parts simultaneously, cutting cycle time in half on the assembly line.
Synchronized Transfer
Pushes a transfer carriage from the back rod while the front rod moves a diverter, keeping both actions perfectly locked in phase.
Is the Airtac SAUD Double Rod Cylinder SAUD80X130 the Right Cylinder?
Choose this 80 mm bore delivering 2268 N equal force when your mechanism requires strict anti-rotation guidance or twin tooling driven from one piston. If you need less thrust, the 63 mm bore offers 1402 N both ways; if you need more, the 100 mm bore provides 3681 N. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. This specific SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors. For any stroke over 300 mm, add external guide rails to prevent side-load binding. Note that a plain cylinder drifts without live air; use an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X130 FAQ
The thrust is equal in both directions because the Ø25 mm rod exits both ends. It produces 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. There is no larger single-rod push value.
No, this specific SKU does not include a piston magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the SAUD80X130-S variant for magnetic sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.