This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU80X292S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU80X292S
The AirTAC SU63-100 Standard Cylinder SU80X292S is a double-acting profile-type standard cylinder with a Ø80mm bore and 292mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU80X292S, which matches its bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke292 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAU80X292S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU63-100 Standard Cylinder SU80X292S
The AirTAC SU80X292S is a discontinued double-acting profile-type cylinder featuring an extruded aluminum barrel and a 292mm stroke. Delivering 2513N push force at 0.5MPa, it is superseded by the direct replacement SAU80X292S, which matches the exact 80mm bore, stroke, 3/8" port, and SC-series mounting. Because 292mm exceeds the 250mm standard increment, it is classified as a nonstandard stroke.
The -S magnet on this legacy unit operated with CS1-B/DS1-B switches, whereas the SAU successor utilizes modern CMSG/DMSG/EMSG sensors. Additionally, the SAU line introduces a SAUF variant with a built-in 4M solenoid valve that the SU series lacked.
Airtac SU63-100 Standard Cylinder SU80X292S Technical Specifications
| Model | Airtac SU63-100 Standard Cylinder SU80X292S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU80X292S |
| Bore size | Ø80 mm |
| Stroke | 292 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU80X292S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAU80X292S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU63-100 Standard Cylinder SU80X292S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×292 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU63-100 Standard Cylinder SU80X292S Is Used
Package Diverting
Actuates routing gates on high-speed sorting lines, utilizing the 2513N thrust to push heavy cartons reliably at cycle speeds up to 800mm/s.
Press Ejection
Ejects formed metal or plastic parts from press beds, using the adjustable 28mm cushions to decelerate the 25mm rod smoothly at stroke end.
Replacing the Airtac SU63-100 Standard Cylinder SU80X292S with the SAU80X292S
To replace this SU80X292S, order the SAU80X292S direct equivalent, verifying the 80mm bore, 292mm nonstandard stroke, 3/8" port, M20x1.5 rod thread, and SC-series mounting. If sizing alternatives, the adjacent 63mm bore yields 1559N push at 0.5MPa, while the 100mm bore provides 3927N. Because the stroke is 292mm (over 300mm is the general threshold, but approaching it), ensure adequate guide support to prevent rod bending under side loads. Note that the -S magnet requires changing from legacy CS1-B/DS1-B switches to CMSG/DMSG/EMSG sensors on the SAU. A plain cylinder drifts without live air; for load holding, install an external rod lock or pilot-operated check valve, as cushions only decelerate. Consider the SAUF variant if a built-in valve is desired.
Replacement checklist
- ✓ Same bore / stroke → SAU80X292S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU63-100 Standard Cylinder SU80X292S FAQ
Yes, the SU80X292S is discontinued. The direct replacement is the AirTAC SAU80X292S. It shares the identical 80mm bore, 292mm stroke, 3/8" port, output force, and SC-series mounting, but requires CMSG/DMSG/EMSG sensors instead of the old CS1-B/DS1-B switches.
The 3/8" ported cylinder delivers 2513N push and 2268N pull at 0.5MPa, 3518N push at 0.7MPa, 4523N push at 0.9MPa, and a theoretical maximum of 513kgf at 1.0MPa. It operates at 30-800mm/s with a 28mm adjustable cushion at both ends.
Related AirTAC SAU Cylinders
Request a Quote for the SAU80X292S
Send us the quantity and destination. We confirm price, stock and lead time on the SAU80X292S replacement — usually within 7-8 hours.