This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ100X80-100S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ100X80-100S
The AirTAC SUJ Adjustable Cylinder SUJ100X80-100S is a double-acting profile-type standard cylinder with a Ø100mm bore and 80mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ100X80-100S, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke80 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAUJ100X80-100S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ100X80-100S
The AirTAC SUJ100X80-100S is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 100 mm on-site (usable extend range 0-80 mm). The 1/2" port and M20x1.5 rod thread handle high flow, while the 29 mm adjustable air cushions decelerate heavy loads smoothly.
This SUJ model is discontinued; the direct replacement is the SAUJ100X80-100S, retaining the same force, 1/2" port, and FA/LB mounting. The SAUJ upgrades sensing to current CMSG/DMSG/EMSG switches (this unit uses legacy CS1-B/DS1-B). Remember the stop screw sets end position only—it is not a load lock; use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ100X80-100S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ100X80-100S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ100X80-100S |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ100X80-100S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAUJ100X80-100S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ100X80-100S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ100X80-100S Is Used
Variable Stroke Pressing
Allows operators to fine-tune the extend distance on-site for pressing assemblies to exact depths without swapping cylinders.
Adjustable Diverter Arms
Enables field adjustment of the extend stroke to accommodate different package sizes on a packaging line.
Variable Height Stops
Permits quick tuning of the stop position for various pallet heights without repositioning the cylinder mount.
Replacing the Airtac SUJ Adjustable Cylinder SUJ100X80-100S with the SAUJ100X80-100S
To replace the discontinued SUJ100X80-100S, order the SAUJ100X80-100S direct: it matches the 100 mm bore, 80 mm max stroke, 100 mm adjust window, 1/2" port, and FA/LB mounting. Choose the 100 mm adjust window if you need to trim the extend stroke aggressively on-site. Because this is an -S model, swap the legacy CS1-B/DS1-B sensors for CMSG/DMSG/EMSG switches on the SAUJ. For strokes >=300 mm, verify side-load limits to prevent rod binding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ100X80-100S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ100X80-100S FAQ
Yes, the SUJ100X80-100S is discontinued. The direct replacement is the SAUJ100X80-100S, which shares the same 100 mm bore, 80 mm stroke, 100 mm adjust window, 1/2" port, and FA/LB mounting. You only need to upgrade the sensors from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG switches.
The external stop screw lets you trim the extend stroke by up to 100 mm on-site (usable extend 0-80 mm). Note the stop sets end position only and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ100X80-100S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ100X80-100S replacement — usually within 7-8 hours.