This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X150-10, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X150-10
The AirTAC SUJ Adjustable Cylinder SUJ32X150-10 is a double-acting profile-type standard cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X150-10, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X150-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X150-10
The AirTAC SUJ32X150-10 is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 10 mm on-site, giving a usable 140-150 mm stroke out of the 150 mm nominal maximum. The stop screw sets the end position but is not a lock; use an external rod lock for held loads.
The direct replacement is the SAUJ32X150-10, which matches the bore, stroke, force, port, and FA/LB mounting. Because this SKU lacks a magnet, it cannot take a magnetic switch, whereas upgrading to the SAUJ with a -S suffix enables current CMSG/DMSG/EMSG sensors (this SUJ used legacy CS1-B/DS1-B).
Airtac SUJ Adjustable Cylinder SUJ32X150-10 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X150-10 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X150-10 |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X150-10 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X150-10 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X150-10
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X150-10 Is Used
Gauge Positioning Stops
Trimming the 150 mm extend stroke by up to 10 mm allows operators to dial in exact contact points for variable-width material gauging without machining custom spacers.
Divertor Arm Adjustment
Fine-tuning the divertor arm extension by 10 mm on-site to accommodate slight product size variations on the line while maintaining a maximum 150 mm reach.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X150-10 with the SAUJ32X150-10
To replace the discontinued SUJ32X150-10, specify the SAUJ32X150-10 for an direct match. Choose the 10 mm adjust window if your mechanism needs precise 140-150 mm extend tuning without shimming; for fixed 150 mm travel, a standard SAU cylinder suffices. Retain FA or LB mounting from the SC series. Since this non-magnetic SKU cannot accept switches, order the SAUJ-S variant and current CMSG/DMSG/EMSG sensors if position detection is needed. For this 150 mm stroke, verify side-load alignment to prevent rod binding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X150-10
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X150-10 FAQ
Yes, the SUJ32X150-10 is discontinued. The direct replacement is the SAUJ32X150-10, matching the 32 mm bore, 150 mm stroke, 1/8" port, and FA/LB mounting. The SAUJ family also supports current CMSG/DMSG/EMSG sensors and offers an SAUF built-in-valve variant.
The external stop screw offers a 10 mm adjust window, shortening the 150 mm nominal extend stroke down to 140 mm. The stop sets end position and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X150-10
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X150-10 replacement — usually within 7-8 hours.