This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ50X100-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ50X100-10S
The AirTAC SUJ Adjustable Cylinder SUJ50X100-10S is a double-acting profile-type standard cylinder with a Ø50mm bore and 100mm stroke, 1/4" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ50X100-10S, which matches its bore, stroke, force and mounting.
- BoreØ50 mm
- Stroke100 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAUJ50X100-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ50X100-10S
The AirTAC SUJ50X100-10S is a double-acting, double-rod profile cylinder with a 100 mm maximum stroke and a built-in piston magnet (-S). An external stop screw lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 90-100 mm stroke window for precise end-position tuning.
The direct replacement is the SAUJ50X100-10S, retaining the 50 mm bore, 1/4" port, M16x1.5 rod thread, and FA/LB mounting compatibility with the SC series. The SAUJ upgrade adopts current CMSG/DMSG/EMSG sensors, superseding the legacy CS1-B/DS1-B switches used here. The stop screw sets end position only; it is not a load lock, so use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ50X100-10S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ50X100-10S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ50X100-10S |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ50X100-10S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
The SAUJ50X100-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ50X100-10S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ50X100-10S Is Used
Probe Contact Tuning
Adjusting the final 0-10 mm extend stroke on-site to set exact contact pressure against delicate test probes without re-mounting the cylinder.
Flight Diverter Setup
Fine-tuning the extend end position by up to 10 mm to accommodate varying package sizes on a packaging line diverter arm.
Pallet Stop Calibration
Trimming the extend stroke in the field to align pallet stops precisely when conveyor roller heights vary slightly.
Replacing the Airtac SUJ Adjustable Cylinder SUJ50X100-10S with the SAUJ50X100-10S
To replace this discontinued SUJ50X100-10S, specify the SAUJ50X100-10S, which matches the 50 mm bore, 100 mm nominal stroke, 10 mm adjust window, 1/4" port, and FA/LB/SC-series mounting. Select the 10 mm adjust window if you need 90-100 mm of extend travel; for larger field trims, choose a 20 mm or 30 mm adjust model. Because this unit has an -S magnet, migrate position sensing from the old CS1-B/DS1-B to the modern CMSG/DMSG/EMSG sensors. For strokes of 300 mm or longer, verify side-load limits to prevent rod binding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ50X100-10S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ50X100-10S FAQ
Yes, the SUJ50X100-10S is discontinued. The direct replacement is the SAUJ50X100-10S, which matches the 50 mm bore, 100 mm stroke, 10 mm adjust window, 1/4" port, and FA/LB mounting. The SAUJ uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
The external stop screw allows you to trim the extend stroke by up to 10 mm on-site, giving a usable 90-100 mm stroke. The stop sets end position only and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ50X100-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ50X100-10S replacement — usually within 7-8 hours.