This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE12X110B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP12X110B
The AirTAC ACP Compact Cylinder ACP12X110B is a double acting DIN-standard tight/compact air cylinder with a Ø12mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE12X110B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ12 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM3×0.5
- StatusDiscontinued → ACE12X110B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP12X110B
A double acting compact cylinder built to the DIN-standard short-body format, the ACP12X110B pairs a 12 mm bore with a 110 mm stroke and a male rod thread (the B code). At 0.5 MPa it pushes 56.5 N and pulls 42.4 N; at 0.7 MPa those figures rise to 79.2 N and 59.4 N, with a theoretical 11.5 kgf at 1.0 MPa. The hard-anodized aluminium body with an S45C hard-chrome rod runs on 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s, and fixed TPU bumpers sit at both ends. Note the 110 mm stroke exceeds the 50 mm maximum standard stroke for this bore, so it is a made-to-order build.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight jigs and guard-mounted actuators. No magnet is fitted on this code, so position switches cannot be mounted; the optional -S magnet enables CMSE / DMSE switches. This model is discontinued: the current-production direct is ACE12X110, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP12X110B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP12X110B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE12X110B |
| Bore size | Ø12 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M3×0.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE12X110B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | 59 N |
| Max (@1.0 MPa) | 12 kgf | |
The ACE12X110B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP12X110B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 12 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP12X110B Is Used
Micro part ejection
The 56.5 N push at 0.5 MPa is enough to strip tiny stamped or moulded parts off a nest on an electronics assembly line, with the 110 mm stroke reaching across a shallow fixture.
Light-duty jig clamping
Roughly 34 N of usable push holds small PCBs, brackets or covers in a drilling or soldering jig where a full-length actuator would not fit.
Compact slide feed
With the optional -S magnet and CMSE / DMSE switches, the short body drives a miniature slide for vial or connector feeding at 30-500 mm/s.
Replacing the Airtac ACP Compact Cylinder ACP12X110B with the ACE12X110B
At 56.5 N push at 0.5 MPa this 12 mm bore suits light clamping and small-part ejection; step up to the 16 mm bore (100.5 N) for roughly double the force, or down to nothing smaller since 12 mm is the smallest in the range. The 110 mm stroke is non-standard for this bore (50 mm max standard), so order it as a made-to-order build. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must hold. Choose the optional -S magnet if CMSE / DMSE sensing is planned. This model is discontinued; the ACE12X110 is the current direct, so verify ISO 21287 mounting dimensions before ordering.
Replacement checklist
- ✓ Current-production ACE → ACE12X110B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP12X110B FAQ
Push is 56.5 N and pull 42.4 N at 0.5 MPa; at 0.7 MPa push is 79.2 N and pull 59.4 N; theoretical maximum is 11.5 kgf at 1.0 MPa. It is double acting with a 6 mm rod, M5x0.8 port, male rod thread (B code), PT port thread, 0.15-1.0 MPa (22-145 psi) operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C temperature range and 30-500 mm/s speed. The 110 mm stroke is a non-standard, made-to-order length for this bore.
No - the ACP12X110B is discontinued. The current-production replacement is ACE12X110 (same bore, stroke and force class); confirm the ISO 21287 mounting dimensions before swapping, since the ACP follows the DIN standard. Sensing is only possible on the -S version, which carries the optional magnet for CMSE / DMSE reed or solid-state switches; this code has no magnet fitted.
Related AirTAC ACE Cylinders
Request a Quote for the ACE12X110B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE12X110B replacement — usually within 7-8 hours.