This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE12X160SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP12X160SB
The AirTAC ACP Compact Cylinder ACP12X160SB is a double acting DIN-standard tight/compact air cylinder with a Ø12mm bore and 160mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE12X160SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ12 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM3×0.5
- StatusDiscontinued → ACE12X160SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP12X160SB
Double acting on a 12 mm bore, the ACP12X160SB pushes 56.5 N and pulls 42.4 N at 0.5 MPa (79.2 N / 59.4 N at 0.7 MPa), with a theoretical peak of 11.5 kgf at 1.0 MPa. The 160 mm stroke is a made-to-order length because the bore 12 standard range stops at 50 mm. This unit carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be mounted for end-of-stroke sensing, and the B code gives a male rod thread.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits slim pick-and-place heads and compact test rigs. Note this model is discontinued: the current-production direct is ACE12X160, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP12X160SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP12X160SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE12X160SB |
| Bore size | Ø12 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M3×0.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE12X160SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | 59 N |
| Max (@1.0 MPa) | 12 kgf | |
The ACE12X160SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP12X160SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 12 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP12X160SB Is Used
Presence checking on electronics assembly lines
The -S magnet with a CMSE switch confirms full extension of a 160 mm probe stroke in PCB test fixtures, where the 12 mm bore keeps the envelope minimal.
Light ejection in small stamping dies
Pushes 56.5 N at 0.5 MPa to eject thin stamped parts from micro-forming tools, with the male rod thread simplifying tooling attachment.
Replacing the Airtac ACP Compact Cylinder ACP12X160SB with the ACE12X160SB
At 56.5 N push at 0.5 MPa, this 12 mm bore suits light clamping and sensing tasks; step to bore 16 (100.5 N) or bore 20 (157.1 N) if the load is heavier. The 160 mm stroke is non-standard for this bore and is built to order. A plain cylinder of this type drifts when air is lost, so add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot or CA/CB clevis mounting and the male rod thread adapt it to small fixtures. Order ACE12X160 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACE12X160SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP12X160SB FAQ
At 0.5 MPa it pushes 56.5 N and pulls 42.4 N; at 0.7 MPa it pushes 79.2 N and pulls 59.4 N. The theoretical maximum is 11.5 kgf at 1.0 MPa. It is double acting, runs 30-500 mm/s on air filtered to 40 um, and operates at 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure. The 160 mm stroke is made to order since bore 12 standard strokes end at 50 mm.
No, the ACP family is discontinued. The current-production direct is ACE12X160, which matches the same 12 mm bore, 160 mm stroke and force class in the ISO 21287 short-body format. Because the ACP was built to a DIN standard, confirm the ISO 21287 mounting dimensions and the FA/FB, LB or CA/CB interface before ordering the swap.
Related AirTAC ACE Cylinders
Request a Quote for the ACE12X160SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE12X160SB replacement — usually within 7-8 hours.