This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X10SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X10SB
The AirTAC ACP Compact Cylinder ACP80X10SB is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 10mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X10SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke10 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X10SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X10SB
Double acting compact cylinder with a 10 mm stroke on an 80 mm bore, the ACP80X10SB pushes 2513.3 N and pulls 2356.2 N at 0.5 MPa, rising to 3518.6 N at 0.7 MPa. The male rod thread (B code) and the fitted optional -S magnet make it ready for CMSE or DMSE switches straight out of the box. Its hard-anodized aluminium body carries a 1/4" port and a fixed TPU bumper at each end.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into press fixtures and clamping bridges where a full-length body cannot. Note this model is discontinued: the current-production direct is ACE80X10, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP80X10SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X10SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X10SB |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X10SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X10SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X10SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X10SB Is Used
Pneumatic press head
The 2513.3 N push at 0.5 MPa suits a short-stroke bench press for staking bushings into aluminium housings, where the 10 mm throw matches the press fit depth.
Clamp bridge on a machining fixture
With about 154 kg of practical clamping force at 0.5 MPa, the male-thread rod holds a swing clamp bridge over a CNC vise jaw without stealing fixture height.
Position-verified part stop
The fitted -S magnet lets a DMSE switch confirm the 10 mm advance of a part stop on a conveyor gating station, wired straight into the PLC input card.
Replacing the Airtac ACP Compact Cylinder ACP80X10SB with the ACE80X10SB
At 10 mm stroke this bore is aimed at short-throw clamping and part-presenting, not long travel; bore 80 tops out at a 300 mm standard stroke, so 10 mm sits well inside range. If 2513.3 N at 0.5 MPa is more than the job needs, bore 50 delivers 981.7 N; if you need more, bore 100 reaches 3927.0 N. Remember a plain cylinder drifts when air is lost, so add a rod lock or pilot check valve for a held load. FA/FB flange, LB foot and CA/CB clevis mounts bolt to the same face family as the ACE80X10, the current replacement for this discontinued model.
Replacement checklist
- ✓ Current-production ACE → ACE80X10SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X10SB FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push rises to 3518.6 N and pull to 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), from -20 to +70 C, at 30-500 mm/s, with a 1/4" port and a 20 mm rod.
The short ISO 21287-class body needs about 50% less mounting length than an ISO 15552 profile cylinder, so it fits tight guards and fixture plates. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed or solid-state switches can be added for end-of-stroke signalling. Since ACP is discontinued, order the ACE80X10 as the current direct and verify the ISO 21287 mounting dimensions first.
Related AirTAC ACE Cylinders
Request a Quote for the ACE80X10SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X10SB replacement — usually within 7-8 hours.