This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X110B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X110B
The AirTAC ACP Compact Cylinder ACP80X110B is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 110mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X110B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X110B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X110B
Double acting on a single 20 mm rod, the ACP80X110B delivers 2513.3 N of push and 2356.2 N of pull at 0.5 MPa, rising to 3518.6 N at 0.7 MPa, with a theoretical ceiling of 512.6 kgf at 1.0 MPa. Its hard-anodized aluminium body is an ISO 21287 class short build, saving roughly 50% of the mounting length of an ISO 15552 profile cylinder, so an 80 mm bore fits presses, clamps and gantries that a full-length body cannot. The B code gives a male rod thread and the port is 1/4".
This model is discontinued: the current-production direct is ACE80X110, the same bore, stroke and force class, so confirm the ISO 21287 mounting dimensions before swapping. The fixed TPU bumper at each end only decelerates the piston; it never holds a load when air is lost, so add a rod lock or pilot check valve where position must be kept. Speed range is 30-500 mm/s and operating pressure 0.15-1.0 MPa (22-145 psi).
Airtac ACP Compact Cylinder ACP80X110B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X110B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X110B |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X110B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X110B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X110B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X110B Is Used
Pneumatic press head
With 2513.3 N of push at 0.5 MPa, the 80 mm bore drives a small stamping or riveting head on an assembly bench, and 3518.6 N is available if the line runs at 0.7 MPa.
Machine tool clamp
On a CNC fixture, the male rod thread (B code) accepts an I/Y knuckle to clamp heavy castings, with the 110 mm stroke clearing the part for loading.
Replacing the Airtac ACP Compact Cylinder ACP80X110B with the ACE80X110B
At 80 mm bore this sits near the top of the compact range: 2513.3 N push at 0.5 MPa versus 1558.6 N from a 63 mm bore, while a 100 mm bore gives 3927.0 N if you need more. The 110 mm stroke is well inside the 300 mm standard limit for this bore, so no made-to-order build is required. Mounting choices are FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot and FTC brackets. No magnet is fitted on this code; if you later need CMSE or DMSE switches, order the -S variant. Replace it with ACE80X110 and verify the ISO 21287 mounting dimensions.
Replacement checklist
- ✓ Current-production ACE → ACE80X110B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X110B FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa that rises to 3518.6 N push and 3298.7 N pull. The theoretical maximum is 512.6 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed 30-500 mm/s.
Order ACE80X110, the current-production ISO 21287 successor: swap the P for an E and you get the same 80 mm bore, 110 mm stroke and force class in a matching short body. The ACP was built to a DIN standard, so confirm the ISO 21287 mounting dimensions against your fixture before the swap. FA/FB flange, LB foot, CA/CB clevis, CR, SDB and FTC mounting options carry over in the ACE family.
Related AirTAC ACE Cylinders
Request a Quote for the ACE80X110B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X110B replacement — usually within 7-8 hours.