This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X110SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X110SB
The AirTAC ACP Compact Cylinder ACP80X110SB is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 110mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X110SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X110SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X110SB
The ACP80X110SB is a double acting compact cylinder in the DIN-standard ACP series, with an 80 mm bore, 110 mm stroke and a 20 mm hard-chrome S45C piston rod on a male thread (the B code). Air drives the rod in both directions, a fixed TPU bumper sits at each end, and the hard-anodized aluminium body takes 1/4" ports. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those figures rise to 3518.6 N and 3298.7 N, with a theoretical ceiling of 512.6 kgf at 1.0 MPa.
This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clamped to the body for end-of-stroke feedback. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits tight clamping stations and gantry Z-axes. Note the ACP family is discontinued: the current-production direct is ACE80X110, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP80X110SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X110SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X110SB |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X110SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X110SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X110SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X110SB Is Used
Weldment clamp fixtures
Clamping steel brackets on an automotive subassembly line: 2513.3 N at 0.5 MPa holds the joint through spot welding, and the short body fits between fixture rails where a full-length cylinder cannot.
Pallet stamping press head
Driving a date-code stamp into cartons on a warehouse conveyor: the 110 mm stroke covers the approach and imprint in one move at speeds up to 500 mm/s, with the -S magnet signalling imprint complete.
Gantry Z-axis part ejector
Ejecting machined housings from a CNC fixture: about 153 kg of vertical push capability at 0.5 MPa clears the nest reliably, and the compact body keeps the gantry beam low.
Replacing the Airtac ACP Compact Cylinder ACP80X110SB with the ACE80X110SB
Size the job both ways: a 63 mm bore gives 1558.6 N push at 0.5 MPa, while this 80 mm bore delivers 2513.3 N - step up only if your fixture has the room. For loads over about 150 kg at 0.5 MPa, keep the 80 mm bore; below that, the 63 mm saves space and air. Remember a plain cylinder drifts when air is lost, so add a rod lock or pilot check valve if the load must stay put. The 110 mm stroke sits well inside the 300 mm standard maximum for this bore. Pair the male rod thread with an I/Y knuckle, choose FA/FB flange, LB foot, CA/CB clevis, CR, SDB or FTC mounting, and order CMSE/DMSE switches to suit the fitted -S magnet. For new projects, specify ACE80X110 - the current replacement in the same force class.
Replacement checklist
- ✓ Current-production ACE → ACE80X110SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X110SB FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa, 3518.6 N push and 3298.7 N pull. The theoretical maximum is 512.6 kgf at 1.0 MPa.
Order ACE80X110: swap the P for an E and you get the current-production ISO 21287 compact cylinder in the same 80 mm bore, 110 mm stroke and force class. Before swapping, confirm the ISO 21287 mounting dimensions against your fixture, since the ACP was built to the older DIN-standard face. This ACP80X110SB has a male rod thread, 1/4" PT ports and the -S magnet for CMSE/DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACE80X110SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X110SB replacement — usually within 7-8 hours.