This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X15, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X15
The AirTAC ACP Compact Cylinder ACP80X15 is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X15 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke15 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X15
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X15
A double acting compact cylinder with an 80 mm bore and a short 15 mm stroke, the ACP80X15 pushes with 2513.3 N and pulls with 2356.2 N at 0.5 MPa (rising to 3518.6 N at 0.7 MPa), fed through a 1/4" port. Its hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suited tight press fixtures and short-throw clamping stations. A fixed TPU bumper sits at both ends, and the rod carries a female M12x1.25 thread - actually M12x1.75 per the datasheet.
Note this model is discontinued: the current-production direct is the ACE80X15, an ISO 21287 cylinder in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping. The optional -S magnet enables CMSE / DMSE switches; without it no sensing is possible.
Airtac ACP Compact Cylinder ACP80X15 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X15 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X15 |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X15 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X15 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X15
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X15 Is Used
Short-stroke press fixture
A 15 mm stroke and 2513.3 N push at 0.5 MPa suit a compact stamping or marking head on an aluminium bracket where a full-length profile cylinder will not fit.
CNC fixture clamp
Clamps a machined housing against a hard stop on a milling fixture; the short ISO 21287-class body keeps the fixture height low inside the guard.
Palletizer push-off
Kicks a carton sideways off a conveyor stop with about 1508 N of practical force at 0.5 MPa, cycling at 30-500 mm/s between the fixed TPU bumpers.
Replacing the Airtac ACP Compact Cylinder ACP80X15 with the ACE80X15
For a 15 mm stroke at this force level, the 80 mm bore delivers 2513.3 N push at 0.5 MPa; step down to a 63 mm bore (1558.6 N) for lighter clamps or up to a 100 mm bore (3927.0 N) for heavy tooling. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mounts bolt to the same face, and ordering the -S code adds the magnet for CMSE / DMSE switches. Buy the ACE80X15 instead: this ACP model is discontinued, and the ACE matches the bore, stroke and force class - verify ISO 21287 mounting dimensions first.
Replacement checklist
- ✓ Current-production ACE → ACE80X15
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X15 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it pushes 3518.6 N and pulls 3298.7 N. The theoretical maximum is 512.6 kgf at 1.0 MPa. It is double acting with a 20 mm rod, a 1/4" port and a female M12x1.75 rod thread, operating on 0.15-1.0 MPa (22-145 psi) filtered air at 30-500 mm/s.
Order the ACE80X15, the current ISO 21287 successor made by swapping the P for an E. It matches the same 80 mm bore, 15 mm stroke and force class, and accepts the same FA/FB flange, LB foot and CA/CB clevis mounting family. Because the ACP was DIN-standard, confirm the ISO 21287 mounting dimensions before the swap, and add the -S code if you need the optional magnet for CMSE / DMSE switches.
Request a Quote for the ACE80X15
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X15 replacement — usually within 7-8 hours.