This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X15LB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X15LB
The AirTAC ACP Compact Cylinder ACP80X15LB is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X15LB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke15 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X15LB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X15LB
A double acting compact cylinder in the DIN-standard ACP series, the ACP80X15LB delivers 2513.3 N of push and 2356.2 N of pull at 0.5 MPa, rising to 3518.6 N at 0.7 MPa, with a theoretical peak of 512.6 kgf at 1.0 MPa. The 15 mm stroke suits short-throw clamping and pressing in the 80 mm bore class, and the LB foot mount bolts into standard fixtures. Note this model is discontinued; the current-production direct is ACE80X15.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow guards and gantry frames where a full-length body will not. The fixed TPU bumper at both ends only decelerates the piston; it never holds a load, so add a rod lock or pilot check valve if the position must survive a loss of air. Speed range is 30-500 mm/s.
Airtac ACP Compact Cylinder ACP80X15LB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X15LB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X15LB |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X15LB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X15LB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X15LB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X15LB Is Used
Press-fit bushing insertion
The 15 mm stroke and 2513.3 N push at 0.5 MPa seat automotive bushings in control-arm housings on a short-stroke press fixture.
Pallet clamp on a machining line
Foot-mounted via LB brackets, the 80 mm bore clamps cast-iron pallets against hard stops in a CNC transfer line.
Replacing the Airtac ACP Compact Cylinder ACP80X15LB with the ACE80X15LB
At 80 mm bore this sits near the top of the ACP range: 2513.3 N push at 0.5 MPa. If your load needs less, a 63 mm bore gives 1558.6 N push at the same pressure; if you need more, the 100 mm bore reaches 3927.0 N. The 15 mm stroke is well inside the 300 mm maximum standard stroke for bore 80, so no made-to-order length is involved. This code has no S suffix, so there is no magnet and no position sensing; order the -S version if you want CMSE or DMSE switches. Confirm the ISO 21287 mounting dimensions of the ACE80X15 replacement before swapping.
Replacement checklist
- ✓ Current-production ACE → ACE80X15LB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X15LB FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N. At 0.7 MPa those rise to 3518.6 N push and 3298.7 N pull. The theoretical maximum is 512.6 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and speed runs 30-500 mm/s. For sizing, treat about 1508 N as the usable thrust at 0.5 MPa.
Order the ACE80X15, the ISO 21287 successor made by swapping the P for an E. It matches the same 80 mm bore, 15 mm stroke and force class with a similar short body and LB foot option. Because the ACP was DIN-standard, confirm the ISO 21287 mounting dimensions against your fixture before the swap. Also remember the -S magnet code if you need CMSE or DMSE switch sensing.
Related AirTAC ACE Cylinders
Request a Quote for the ACE80X15LB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X15LB replacement — usually within 7-8 hours.