This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X15SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X15SB
The AirTAC ACP Compact Cylinder ACP80X15SB is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X15SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke15 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X15SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X15SB
The ACP80X15SB is a double acting compact cylinder in the DIN-standard ACP series, with an 80 mm bore, a 15 mm stroke and a 20 mm male-threaded rod (the B code). At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those rise to 3518.6 N and 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. Air supply is 0.15-1.0 MPa (22-145 psi), proof pressure is 1.5 MPa (215 psi), and rod speed runs 30-500 mm/s. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be mounted directly on the body.
The hard-anodized aluminium body with an S45C hard-chrome rod saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore class fits tight clamping bridges and press heads. Note that this ACP model is discontinued: the current-production direct is ACE80X15, and you should confirm the ISO 21287 mounting dimensions before swapping. A fixed TPU bumper at each end absorbs end-of-travel impact but does not hold the load when air is lost.
Airtac ACP Compact Cylinder ACP80X15SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X15SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X15SB |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X15SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X15SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X15SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X15SB Is Used
Clamping of machined housings
The 2513.3 N push at 0.5 MPa and short 15 mm stroke suit a fixture clamp that swings in fast and holds an aluminium gearbox housing during a milling cut.
Press-head eject on assembly benches
With about 153 kg of usable thrust at 0.5 MPa, the cylinder ejects pressed bushings from a die in one short 15 mm kick on an automotive sub-assembly line.
Replacing the Airtac ACP Compact Cylinder ACP80X15SB with the ACE80X15SB
At 80 mm bore this is a heavy-thrust short-stroke unit: 2513.3 N push at 0.5 MPa. If your load needs under about 1374 N, the 50 mm bore (981.7 N push) may suffice; if you need beyond 3518 N, step up to the 100 mm bore (3927.0 N push at 0.5 MPa). The 15 mm stroke sits well inside the 300 mm maximum standard stroke for this bore. Choose FA/FB flange, LB foot or CA/CB clevis mounting to match the fixture, and remember the -S magnet is what enables CMSE / DMSE position sensing. For loads that must stay put on air loss, add a rod lock or pilot check valve. Order ACE80X15 as the current replacement and verify ISO 21287 mounting dimensions.
Replacement checklist
- ✓ Current-production ACE → ACE80X15SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X15SB FAQ
At 0.5 MPa the 80 mm bore gives 2513.3 N push and 2356.2 N pull; at 0.7 MPa it reaches 3518.6 N push and 3298.7 N pull. The theoretical maximum is 512.6 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and speed is 30-500 mm/s.
Order ACE80X15, the ISO 21287 successor: swap the P for an E and you get the same 80 mm bore, 15 mm stroke and force class in a short compact body. Confirm the ISO 21287 mounting dimensions before the swap, since the ACP was built to the DIN standard. This model has the -S magnet fitted, so CMSE / DMSE switches mount on either version.
Related AirTAC ACE Cylinders
Request a Quote for the ACE80X15SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X15SB replacement — usually within 7-8 hours.