This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X15SBG, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X15SBG
The AirTAC ACP Compact Cylinder ACP80X15SBG is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X15SBG (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke15 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X15SBG
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X15SBG
The ACP80X15SBG is a double acting DIN-standard compact cylinder with an 80 mm bore and a short 15 mm stroke, fitted with the optional -S magnet and a male rod thread (B code) with G ports. At 0.5 MPa it pushes with 2513.3 N and pulls with 2356.2 N; at 0.7 MPa those figures rise to 3518.6 N and 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. Its hard-anodized aluminium body with an S45C hard-chrome 20 mm rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press fixtures and guarding where a full-length body cannot. Note that this model is discontinued: the current-production direct is ACE80X15, so confirm the ISO 21287 mounting dimensions before swapping. A fixed TPU bumper sits at both ends, and when air is lost the piston drifts - add a rod lock or pilot check valve if the load must stay put.
Airtac ACP Compact Cylinder ACP80X15SBG Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X15SBG |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X15SBG |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X15SBG (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X15SBG produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X15SBG
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X15SBG Is Used
Short-throw die clamping
The 15 mm stroke and 2513.3 N push at 0.5 MPa lock a stamping or injection die into its nest on a press table without wasting daylight or mounting length.
Gantry z-axis part seating
A robotic gantry uses the short body to seat machined housings into a fixture; the -S magnet with a DMSE switch confirms the seated position to the PLC.
Bottle-line gate actuation
On a food and beverage filling line, the 80 mm bore swings a short-stroke gate or stopper, with the fixed TPU bumper absorbing the end-of-travel impact at 30-500 mm/s.
Replacing the Airtac ACP Compact Cylinder ACP80X15SBG with the ACE80X15SBG
At 80 mm bore this sits near the top of the range: 2513.3 N push at 0.5 MPa, versus 1558.6 N for a 63 mm bore and 3927.0 N for a 100 mm bore, so step down to 63 if force is spare or up to 100 for heavy clamping. The 15 mm stroke suits short-throw locating and clamping within the 300 mm max standard stroke for this bore. This unit carries the -S magnet, so CMSE or DMSE switches mount directly for end-of-stroke sensing, and the male rod thread plus G ports suit export plumbing. It is discontinued - order ACE80X15 as the current equivalent and verify the ISO 21287 mounting footprint first.
Replacement checklist
- ✓ Current-production ACE → ACE80X15SBG
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X15SBG FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it pushes 3518.6 N and pulls 3298.7 N; theoretical maximum is 512.6 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure.
Order the ACE80X15, the ISO 21287 successor made by swapping the P for an E: same 80 mm bore, 15 mm stroke and force class, with a matching short body and mounting family. Because the ACP was DIN-standard, confirm the ISO 21287 mounting dimensions against your fixture before swapping. This unit already includes the -S magnet, so CMSE / DMSE switches will work on the ACE equivalent when the -S code is ordered.
Related AirTAC ACE Cylinders
Request a Quote for the ACE80X15SBG
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X15SBG replacement — usually within 7-8 hours.