This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X160, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X160
The AirTAC ACP Compact Cylinder ACP80X160 is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 160mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X160 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke160 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X160
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X160
The ACP80X160 is a double acting compact cylinder with a 160 mm stroke on an 80 mm bore, pushing 2513.3 N and pulling 2356.2 N at 0.5 MPa (3518.6 N / 3298.7 N at 0.7 MPa). Its hard-anodized aluminium body and S45C hard-chrome rod run on 0.15-1.0 MPa (22-145 psi) of filtered air at 30-500 mm/s, with a fixed TPU bumper at each end. Note that this model is discontinued; the current-production successor is the ACE80X160.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into press fixtures and gantries where a full-length body will not fit. Rod end is a female M12x1.75 thread with a 1/4" port, and FA/FB flange, LB foot or CA/CB clevis mounts bolt straight to the standard face. Position sensing needs the optional -S magnet code; without it no CMSE or DMSE switch can be fitted.
Airtac ACP Compact Cylinder ACP80X160 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X160 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X160 |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X160 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X160 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X160
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X160 Is Used
Pneumatic press fixture
The 2513.3 N push at 0.5 MPa (about 1508 N usable) clinches, stakes or forms aluminium brackets on a short-stroke press bench where a full-length body will not fit.
Gantry clamp on a CNC line
Clamps machined housings against a fixture on a CNC loading gantry; the 160 mm stroke clears the part and the FA flange bolts to a standard mounting face.
Replacing the Airtac ACP Compact Cylinder ACP80X160 with the ACE80X160
At 80 mm bore this sits near the top of the range: 2513.3 N push at 0.5 MPa versus 1558.6 N for a 63 mm bore, while the 100 mm bore reaches 3927.0 N if you need more. The 160 mm stroke is well inside the 300 mm standard limit for this bore. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. Order the -S code if you want CMSE / DMSE switch capability. Since ACP is discontinued, spec the ACE80X160 as the direct and confirm the ISO 21287 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ACE80X160
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X160 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa that rises to 3518.6 N push and 3298.7 N pull. The theoretical maximum is 512.6 kgf at 1.0 MPa. It is double acting, runs at 30-500 mm/s on 0.15-1.0 MPa (22-145 psi) air, and the 160 mm stroke is within the 300 mm standard limit for the 80 mm bore.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with FA/FB flange, LB foot and CA/CB clevis options and a female M12x1.75 rod thread on a 1/4" port. The ACP80X160 itself is discontinued - order the ACE80X160 as the current direct and confirm the ISO 21287 mounting dimensions before the swap.
Request a Quote for the ACE80X160
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X160 replacement — usually within 7-8 hours.