This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X160S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X160S
The AirTAC ACP Compact Cylinder ACP80X160S is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 160mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X160S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke160 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X160S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X160S
A double acting DIN-standard compact cylinder, the ACP80X160S pairs an 80 mm bore with a 160 mm stroke and a 20 mm hard-chrome S45C rod on a hard-anodized aluminium body. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N at 0.7 MPa, with a theoretical maximum of 512.6 kgf at 1.0 MPa. Air supply is 0.15-1.0 MPa (22-145 psi) and rod speed runs 30-500 mm/s.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into press fixtures and gantries where a full-length bore-80 cylinder will not fit. The S code means the optional -S magnet is fitted, so CMSE or DMSE switches can read position directly. This model is discontinued: the current direct is ACE80X160, so confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP80X160S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X160S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X160S |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X160S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X160S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X160S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X160S Is Used
Pneumatic press fixture
The 3518.6 N push at 0.7 MPa suits a bench-top crimping or staking press on aluminium brackets, with the 160 mm stroke clearing part loading by hand.
Gantry with position feedback
Because the -S magnet is fitted, CMSE or DMSE switches report end-of-stroke on an automated clamp gantry, and the short body fits under the guard frame.
Replacing the Airtac ACP Compact Cylinder ACP80X160S with the ACE80X160S
If 2513.3 N of push at 0.5 MPa covers your load with margin, the 80 mm bore is right; a 63 mm bore gives 1558.6 N and a 100 mm bore gives 3927.0 N at the same pressure. Remember that a plain cylinder drifts when air is lost, so add a rod lock or pilot check valve if the load must stay put. This unit carries the optional -S magnet for CMSE / DMSE switches, and FA/FB flange, LB foot or CA/CB clevis mounting bolts to the same face. Since ACP80X160S is discontinued, order ACE80X160 as the current-production equivalent and verify the ISO 21287 mounting dimensions.
Replacement checklist
- ✓ Current-production ACE → ACE80X160S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X160S FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those rise to 3518.6 N and 3298.7 N. The theoretical maximum is 512.6 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and rod speed spans 30-500 mm/s.
No, the ACP family is discontinued. The current-production direct is ACE80X160, the ISO 21287 successor in the same bore, stroke and force class with the same 1/4" port and M12x1.75 female rod thread. Confirm the ISO 21287 mounting dimensions against your fixture before swapping, since the ACP was built to the DIN standard.
Related AirTAC ACE Cylinders
Request a Quote for the ACE80X160S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X160S replacement — usually within 7-8 hours.