This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ12X15-10, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ12X15-10
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ12X15-10 is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø12mm bore and 15mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ12X15-10 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ12 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM3×0.5
- StatusDiscontinued → ACEJ12X15-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ12X15-10
The ACPJ12X15-10 is a double acting compact cylinder with an adjustable stroke: a stop screw trims the extend stroke anywhere in a 10 mm window, so the usable range is 5-15 mm. The 12 mm bore delivers 56.5 N push and 42.4 N pull at 0.5 MPa, rising to 79.2 N push at 0.7 MPa. Because the short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into slim fixtures, small guarding and tight gantries. Note this model is discontinued; the current-production replacement is the ACEJ12X15.
Practically, plan for roughly 34 N (about 3.5 kgf) of real work at 0.5 MPa instead of the full rating, and expect it to lift about 2.9 kg vertically with a 2:1 margin. The hard-anodized aluminium body carries an S45C hard-chrome rod with a female M3x0.5 thread, M5x0.8 ports, fixed TPU bumpers at both ends and speeds of 30-500 mm/s. No magnet is fitted on this version; the optional -S code adds one for CMSE / DMSE switches. Confirm ISO 21287 mounting dimensions before swapping to the ACEJ12X15.
Airtac ACPJ Adjustable Compact Cylinder ACPJ12X15-10 Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ12X15-10 |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ12X15-10 |
| Bore size | Ø12 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M3×0.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ12X15-10 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø12mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 42 N |
| 0.7 MPa | 59 N |
| Max (@1.0 MPa) | 9 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ12X15-10
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 12 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ12X15-10 Is Used
Micro part clamping
Clamps small electronics or watch components in a slim jig where the 5-15 mm trimmed stroke and 34 N usable force are enough for light hold-down.
Test station ejection
Ejects PCBs or small housings from a test nest; with the -S magnet option, CMSE or DMSE switches confirm end positions in the 15 mm travel.
Compact gate pusher
Pushes a small slider or gate on an automated fixture, using the stop screw to set the exact extend position inside the 10 mm window.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ12X15-10 with the ACEJ12X15-10
At 12 mm bore this is the smallest force class in the family: 56.5 N push at 0.5 MPa versus 100.5 N for a 16 mm bore and 157.1 N for a 20 mm bore, so step up if your part weight or clamp force is near the limit. The 15 mm stroke sits well inside the 50 mm maximum standard stroke for this bore. The stop screw only shortens the extend stroke and does not hold a load on air loss. If you need position sensing, order the -S variant; this code has no magnet. FA/FB flange and LB foot mountings bolt to the standard face. For new projects, specify the ACEJ12X15 instead.
Replacement checklist
- ✓ Current-production ACE → ACEJ12X15-10
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ12X15-10 FAQ
Push is 56.5 N and pull 42.4 N at 0.5 MPa; at 0.7 MPa push is 79.2 N and pull 59.4 N, with a theoretical maximum of 11.5 kgf at 1.0 MPa. It is double acting with a 15 mm stroke trimmed by a 10 mm stop window (usable 5-15 mm), M5x0.8 ports, a 6 mm rod with female M3x0.5 thread, operating pressure 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s and fixed TPU bumpers at both ends. The model is discontinued; the ACEJ12X15 is the drop-in successor.
An external stop screw shortens the extend stroke within the ordered 10 mm window, so you can set anywhere from 5 mm to the full 15 mm; it cannot lengthen the stroke past 15 mm. The stop is a mechanical end stop only - on air loss the piston still drifts, so it is not a load-holding brake. The fixed TPU bumpers at each end just decelerate the piston. For sensing, the optional -S magnet enables CMSE / DMSE switches; this standard code has no magnet.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ12X15-10
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ12X15-10 replacement — usually within 7-8 hours.