This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ASE100X25B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ASP Single Acting Guided Compact Cylinder ASP100X25B
The AirTAC ASP Single Acting Guided Compact Cylinder ASP100X25B is a single acting, push (spring return) DIN-standard tight/compact air cylinder with a Ø100mm bore and 25mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ASE100X25B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke25 mm
- Port size1/4"
- Acting typeSingle acting, push (spring return)
- Rod threadM16×1.5
- StatusDiscontinued → ASE100X25B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ASP Single Acting Guided Compact Cylinder ASP100X25B
A single acting push cylinder with spring return, the ASP100X25B extends its 25 mm rod on air and retracts on the built-in spring, so one air line is all the plumbing it needs. At the 100 mm bore it is the strongest model in the family: 3640.7 N of push at 0.5 MPa and 5211.5 N at 0.7 MPa, both already net of the spring. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why this force class fits clamping stations and press fixtures that a full-length body cannot. Note this model is discontinued; the current-production successor is the ASE100X25.
The male rod thread (the B code) bolts straight to I/Y knuckles on the ISO 21287 face, and FA/FB flange, LB foot and CA/CB clevis brackets are available. The magnet is not fitted on this code; order the optional -S version if you need CMSE or DMSE switch sensing. Operating range is 0.2-1.0 MPa (28-145 psi) with 50-500 mm/s speed.
Airtac ASP Single Acting Guided Compact Cylinder ASP100X25B Technical Specifications
| Model | Airtac ASP Single Acting Guided Compact Cylinder ASP100X25B |
|---|---|
| Series | ASP DIN compact cylinder (discontinued) |
| Replacement | ASE100X25B |
| Bore size | Ø100 mm |
| Stroke | 25 mm |
| Acting type | Single acting, push (spring return) |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ASE100X25B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force (spring return) |
|---|---|
| 0.5 MPa | 3640.7 N |
| 0.7 MPa | 5211.5 N |
Single-acting push: air extends the rod; the return spring retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ASP Single Acting Guided Compact Cylinder ASP100X25B
| ASP | DIN compact cylinder (single-acting push, spring-return, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ASP Single Acting Guided Compact Cylinder ASP100X25B Is Used
Baler lid clamp
The 3640.7 N push at 0.5 MPa locks a small scrap-baler lid through its 25 mm lock stroke, and the spring retracts it the moment air drops.
Press-fit anvil
A short-strike press anvil for pressing bushings into aluminium housings uses the 25 mm stroke and male rod thread under a knuckle.
Replacing the Airtac ASP Single Acting Guided Compact Cylinder ASP100X25B with the ASE100X25B
Size up or down by force: the 80 mm bore gives 2316.2 N at 0.5 MPa if 3640.7 N is more than the job needs, while this 100 mm bore is the ceiling of the range. On air loss the spring drives the rod home to the retracted position, so it will not hold a mid-stroke load. If you need sensing, order ASP100X25SB-S with the optional magnet for CMSE / DMSE switches. Before swapping to the ASE100X25 replacement, confirm the ISO 21287 mounting dimensions against your fixture.
Replacement checklist
- ✓ Current-production ACE → ASE100X25B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ASP Single Acting Guided Compact Cylinder ASP100X25B FAQ
Push is 3640.7 N at 0.5 MPa and 5211.5 N at 0.7 MPa, both already net of the return spring. Minimum working pressure is 0.2 MPa to overcome the spring, with an operating band of 0.2-1.0 MPa (28-145 psi), proof pressure 1.5 MPa (215 psi), speed 50-500 mm/s, and a 1/4" PT air port on the 100 mm bore.
It is a compact short-body cylinder with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends, saving about 50% of the mounting length of an ISO 15552 profile cylinder. The model is discontinued; the current-production direct is the ASE100X25 in the same bore, stroke and force class - confirm ISO 21287 mounting dimensions before swapping.
Related AirTAC ACE Cylinders
Request a Quote for the ASE100X25B
Send us the quantity and destination. We confirm price, stock and lead time on the ASE100X25B replacement — usually within 7-8 hours.