This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ASE80X10SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ASP Single Acting Guided Compact Cylinder ASP80X10SB
The AirTAC ASP Single Acting Guided Compact Cylinder ASP80X10SB is a single acting, push (spring return) DIN-standard tight/compact air cylinder with a Ø80mm bore and 10mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ASE80X10SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke10 mm
- Port size1/4"
- Acting typeSingle acting, push (spring return)
- Rod threadM12×1.75
- StatusDiscontinued → ASE80X10SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ASP Single Acting Guided Compact Cylinder ASP80X10SB
A single acting push cylinder with spring return, the ASP80X10SB uses shop air to extend its 20 mm rod and an internal spring to retract it, so one air line is all the plumbing needs. At the big 80 mm bore this model delivers 2316.2 N of push at 0.5 MPa and 3321.5 N at 0.7 MPa, both figures already net of the spring, from just 0.2 MPa (28-145 psi working band, 1.5 MPa / 215 psi proof) upward. The male rod thread (B code) and the fitted -S magnet for CMSE / DMSE switches are built into this ordering code.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into clamping fixtures and press heads a full-length body cannot reach. Note this ASP series is discontinued; the current-production direct is ASE80X10, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ASP Single Acting Guided Compact Cylinder ASP80X10SB Technical Specifications
| Model | Airtac ASP Single Acting Guided Compact Cylinder ASP80X10SB |
|---|---|
| Series | ASP DIN compact cylinder (discontinued) |
| Replacement | ASE80X10SB |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Single acting, push (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ASE80X10SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force (spring return) |
|---|---|
| 0.5 MPa | 2316.2 N |
| 0.7 MPa | 3321.5 N |
Single-acting push: air extends the rod; the return spring retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ASP Single Acting Guided Compact Cylinder ASP80X10SB
| ASP | DIN compact cylinder (single-acting push, spring-return, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ASP Single Acting Guided Compact Cylinder ASP80X10SB Is Used
Casting seating press
The 2316.2 N push at 0.5 MPa seats aluminium housings into a jig in one 10 mm move, with the spring clearing the ram the moment air is dumped.
Bottling line gate actuator
Mounted beside a filler carousel, the short body fits the guard channel and the 1/4" port feeds a fast 50-500 mm/s gate stroke on a single solenoid.
Pallet presence check station
With the fitted -S magnet and a DMSE switch, the PLC confirms the 20 mm rod extended against a pallet edge before the transfer table indexes.
Replacing the Airtac ASP Single Acting Guided Compact Cylinder ASP80X10SB with the ASE80X10SB
Size by force first: if 2316.2 N at 0.5 MPa is more than your job needs, the 63 mm bore gives 1420.5 N in the same single acting push format; if you need more, the 100 mm bore reaches 3640.7 N. The 10 mm stroke suits short clinch, eject and detect moves, and the spring returns the rod home on air loss rather than holding a mid-stroke position. This code carries the optional -S magnet and a male rod thread; flange, foot and clevis brackets bolt to the same face. Order ASE80X10 as the current replacement and verify the ISO 21287 footprint.
Replacement checklist
- ✓ Current-production ACE → ASE80X10SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ASP Single Acting Guided Compact Cylinder ASP80X10SB FAQ
Push is 2316.2 N at 0.5 MPa and 3321.5 N at 0.7 MPa, both already net of the return spring. Working range is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof, air filtered to 40 um, speed 50-500 mm/s, temperature -20 to +70 C, and a 1/4" port on the 80 mm bore.
The ISO 21287-class aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, and fixed TPU bumpers pad both ends of travel. If air pressure drops, the spring drives the rod back to its retracted home position - it does not hold a mid-stroke load. This model is discontinued; ASE80X10 is the current direct, so confirm ISO 21287 mounting dimensions first.
Related AirTAC ACE Cylinders
Request a Quote for the ASE80X10SB
Send us the quantity and destination. We confirm price, stock and lead time on the ASE80X10SB replacement — usually within 7-8 hours.