This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAUJ100X200-10 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAUJ100X200-10 in place of this model. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ100X200-10
The AirTAC Airtac SUJ Adjustable Cylinder SUJ100X200-10 is a double-acting profile-type standard cylinder with a Ø100mm bore and 200mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAUJ100X200-10, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke200 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAUJ100X200-10
About the Airtac SUJ Adjustable Cylinder SUJ100X200-10
The AirTAC SUJ100X200-10 is a double-acting single-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 190-200 mm extension out of the 200 mm nominal maximum. This compact extruded-aluminum body is shorter than a standard cylinder of the same bore, operating at 30-800 mm/s with a 1/2" port and M20x1.5 rod thread. This SKU has no magnet and cannot accept a magnetic switch.
Delivering 3927 N push and 3681 N pull at 0.5 MPa (7068 N push at 0.9 MPa), it yields a safe working load of roughly 2356 N or a 200 kg vertical lift with a 2:1 margin. The SUJ100X200-10 is discontinued; the exact drop-in replacement is the SAUJ100X200-10, which retains the bore, force, port, and FA/LB mounting, but upgrades sensing to current CMSG/DMSG/EMSG sensors from the legacy CS1-B/DS1-B. Note the stop screw sets end position but is not a load lock; use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ100X200-10 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ100X200-10 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ100X200-10 |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ100X200-10 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAUJ100X200-10 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ100X200-10
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ100X200-10 Is Used
Press Fit Calibration
Trimming the extend stroke by up to 10 mm on-site allows precise bottoming force for pressing bearings without machining hard stops.
Divertor Gate Positioning
Fine-tuning the 190-200 mm extend window aligns divertor gates perfectly to varying product widths on the fly.
Carton Sealing Stroke
Adjusting the end position compensates for flap thickness variations, ensuring consistent sealing head contact.
Replacing the Airtac SUJ Adjustable Cylinder SUJ100X200-10 with the SAUJ100X200-10
To replace the discontinued SUJ100X200-10, order the drop-in SAUJ100X200-10, which preserves the 100 mm bore, 200 mm stroke, 1/2" port, and FA/LB mounting. When sizing both ways, the neighboring 80 mm bore provides 2513 N push at 0.5 MPa, while the 100 mm offers 3927 N; choose the 100 mm if you need the 7068 N push at 0.9 MPa. The -10 mm adjust window is ideal for fine-tuning the extend end position without adding an external stop. Because this non-magnetic SKU lacks a switch, migrate any legacy CS1-B/DS1-B sensing to CMSG/DMSG/EMSG sensors on the SAUJ. For stroke lengths of 300 mm or more, verify side-load limits to prevent guide wear.
Replacement checklist
- ✓ Same bore / stroke → SAUJ100X200-10
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ100X200-10 FAQ
Yes, the SUJ100X200-10 is discontinued. The exact drop-in replacement is the SAUJ100X200-10, which matches the 100 mm bore, 200 mm stroke, 1/2" port, and FA/LB mounting. The SAUJ also uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B.
It delivers 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and 7068 N push at 0.9 MPa. The external stop screw provides a 10 mm adjust window, allowing you to shorten the 200 mm nominal extend stroke down to 190 mm. The stop sets end position only; it is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ100X200-10
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ100X200-10 replacement — usually within 7-8 hours.