The AirTAC Airtac SAUJ100 Adjustable Cylinder SAUJ100X200-10 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 200mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X200-10 is a double-acting, single-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you trim the 200 mm nominal stroke by up to 10 mm, yielding a 190-200 mm usable window without buying a new actuator. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions.
This 100 mm bore generates 3927 N push and 3681 N pull at 0.5 MPa, scaling to 7068 N at 0.9 MPa. The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. For sizing, the safe working load is roughly 2356 N, and it can vertically lift about 200 kg with a 2:1 margin. Note this SKU lacks a magnet, so it cannot take a sensor.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X200-10 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows precise 0-10 mm field adjustment of the extend stroke to set exact insertion depth for bearing press fits without changing actuators.
Trim the extend stop by up to 10 mm on-site to dial in the exact contact point for varying pallet widths on a heavy-duty conveyor line.
Micro-adjust the down stroke end position to compensate for material thickness variations during heavy box sealing operations.
When sizing, the neighboring 80 mm bore yields 2513 N push at 0.5 MPa, while the 100 mm delivers 3927 N. Choose the SAUJ over a fixed SAU plus external stop when you need integrated, compact stroke trimming within a 10 mm window. Mounting options include Basic, FA flange, and LB foot, compatible with the AirTAC SC series. Because this non-S SKU lacks a magnet, it cannot accept CMSG or DMSG sensors. For any stroke over 300 mm, ensure external guiding to manage side loads.
Quick checklist
At 0.5 MPa it provides 3927 N push and 3681 N pull. Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The 200 mm nominal extend stroke can be shortened by up to 10 mm via the external stop screw, giving a 190-200 mm working range. It uses a 1/2 inch port.
No. A plain SAUJ cylinder does not hold the load without live air; the piston will drift and the 29 mm air cushion only decelerates near the end of the stroke. The external stop screw sets the end position but is not a load lock. To maintain a vertical load, use an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.