This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ63X200-30, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ63X200-30
The AirTAC SUJ Adjustable Cylinder SUJ63X200-30 is a double-acting profile-type standard cylinder with a Ø63mm bore and 200mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ63X200-30, which matches its bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke200 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAUJ63X200-30
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ63X200-30
The AirTAC SUJ63X200-30 is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 30 mm on-site, yielding a usable 170-200 mm extend out of the 200 mm nominal maximum. The 3/8" port and M16x1.5 rod end are fixed by the bore. This SUJ model is discontinued; the direct replacement is the SAUJ63X200-30, matching the bore, stroke, force, port, and FA/LB mounting.
Because the stop screw only sets the end position, it is not a load lock; a plain cylinder drifts on air loss, so use an external rod lock or pilot-operated check valve for held loads. This non-magnet SKU cannot take a switch. The SAUJ upgrade adopts current CMSG/DMSG/EMSG sensors, whereas this legacy unit used CS1-B/DS1-B switches.
Airtac SUJ Adjustable Cylinder SUJ63X200-30 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ63X200-30 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ63X200-30 |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ63X200-30 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The SAUJ63X200-30 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ63X200-30
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ63X200-30 Is Used
Variable-Length Ejector
Trimming the extend stroke by up to 30 mm on-site allows an ejection pin to hit different material thicknesses without swapping the entire cylinder.
Adjustable Transfer Stop
A 170-200 mm extend window lets operators fine-tune the physical stop position on a conveyor lane for changing package dimensions.
Tunable Divert Gate
Field-adjusting the gate extend length by up to 30 mm ensures precise sorting angles for varying product widths without re-plumbing the pneumatics.
Replacing the Airtac SUJ Adjustable Cylinder SUJ63X200-30 with the SAUJ63X200-30
To replace the discontinued SUJ63X200-30, order the direct replacement SAUJ63X200-30 directly; bore, stroke, 30 mm adjust window, 3/8" port, and FA/LB mounting remain identical. Choose the 30 mm adjust window if you need field tuning of the extend end position; a fixed SAU plus external stop lacks this integrated trim. For mounting, use SC-series compatible FA or LB brackets. Because this SKU lacks a magnet, it cannot take a sensor; the SAUJ upgrade moves to CMSG/DMSG/EMSG switches (the SUJ used legacy CS1-B/DS1-B). At a 200 mm stroke, side-load alignment is moderate, but for any stroke 300 mm or longer, carefully align rod guidance to prevent binding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ63X200-30
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ63X200-30 FAQ
Yes, the SUJ63X200-30 is discontinued. The direct replacement is the SAUJ63X200-30, which matches the 63 mm bore, 200 mm stroke, 30 mm adjust window, 3/8" port, and FA/LB mounting. The SAUJ also uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
The external stop screw provides a 30 mm adjust window, shortening the 200 mm nominal extend stroke down to 170 mm on-site. The stop sets end position only; it is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ63X200-30
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ63X200-30 replacement — usually within 7-8 hours.