This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X150S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X150S
The AirTAC ACP Compact Cylinder ACP80X150S is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X150S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X150S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X150S
A double acting compact cylinder in the DIN-standard ACP series, the ACP80X150S pairs an 80 mm bore with a 150 mm stroke and delivers 2513.3 N push and 2356.2 N pull at 0.5 MPa (rising to 3518.6 N / 3298.7 N at 0.7 MPa, with a theoretical 512.6 kgf at 1.0 MPa). The S code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clamped onto the hard-anodized aluminium body for end-of-stroke signalling.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight guards and gantry frames. Note this model is discontinued: the current-production direct is the ACE80X150, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP80X150S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X150S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X150S |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X150S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X150S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X150S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X150S Is Used
Pallet clamp actuation
Clamps pallet fixtures on a machining line, where 2513.3 N at 0.5 MPa holds workpieces through milling cycles in a short envelope.
Battery-change gate
Drives the interlock gate on a warehouse battery-change station; the fitted -S magnet feeds CMSE switch signals to the PLC interlock.
Replacing the Airtac ACP Compact Cylinder ACP80X150S with the ACE80X150S
At 80 mm bore this sits near the top of the range: a 63 mm bore gives 1558.6 N push at 0.5 MPa, while a 100 mm bore reaches 3927.0 N. If the load needs to stay put when air is lost, add a rod lock or pilot check valve, since the piston drifts once pressure drops. Female M12x1.75 rod thread, PT ports, 1/4" supply, and FA/FB flange, LB foot or CA/CB clevis mounting cover most fixtures. This unit is discontinued; order ACE80X150 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACE80X150S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X150S FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa that rises to 3518.6 N push and 3298.7 N pull, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The model is discontinued. The current-production replacement is ACE80X150 in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
Because the S code is in the ordering code, the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches mount directly on the body. Mounting brackets include FA/FB flange, LB foot and CA/CB clevis. The rod end is female M12x1.75, the port is 1/4" PT, and the fixed TPU bumper at each end simply decelerates the piston - it never holds a load when air is lost.
Related AirTAC ACE Cylinders
Request a Quote for the ACE80X150S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X150S replacement — usually within 7-8 hours.